Mobile phone hard press testing machine

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product Details

One Product Overview

This machine can simulate products such as mobile phones, simulate human repeated seat compression life tests, use a round aluminum rod with a certain hardness as the pressure head, drive with a cylinder, adjust a certain pressure of 17kg, and measure the degree of damage after reaching the number of times. This machine can simulate products such as mobile phones, simulate human repeated seat compression life tests, use a round aluminum rod with a certain hardness as the pressure head, drive with a cylinder, adjust a certain pressure of 17kg, and measure the degree of damage after reaching the number of times. The mobile communication handheld device should be unpacked and equipped with the matching battery to lock the keyboard when turned on. The keyboard should be facing upwards, and the body and fixed bracket should be placed vertically on a 12cm long round aluminum extrusion head at a frequency of 15-30 times per minute with a compression force of (250 ± 10) N. The sample should be extruded 1000 times, and then the function, appearance, and assembly should meet the requirements of relevant standards. Handheld devices with folding, sliding, and rotating structures should be tested in their closed state.

II meet the standard

satisfystandardYD/T 1539-2006 standard.

III Product Parameters

1.Testing station: 1

2.Test sample:150mmX70mm， Adjustable within 5-25mm in height

3.Working frequency:15-55 times/minute

4.Force sensor:200Kg

5.Alarm time:5-10 seconds (fixed)

6.Pressure head requirement: Use round bar aluminum material

7.Machine size:50×40×70cm

8.Weight:45Kg

9.power supplyAC～2220 50Hz

Core functions and testing scenarios

Static hard pressing testSimulate scenarios such as a mobile phone being squeezed by heavy objects or placed in a pocket under sitting pressure. By setting a fixed pressure value (such as 500N, 1000N) and holding it for a certain period of time (such as 30s, 60s), observe whether the phone has problems such as screen breakage, shell deformation, button failure, or internal component damage.

Dynamic Hard Compression TestSimulate the situation where a mobile phone is subjected to repeated impact pressure (such as the instantaneous pressure when it comes into contact with a hard object during a fall, frequent squeezing). The device will cyclically apply pressure at a set frequency and pressure amplitude to test the phone's fatigue and pressure resistance, and evaluate its structural stability under long-term use.

Multi point/fixed-point pressure testingTargeted pressure can be applied to weak areas of mobile phones, such as screen edges, camera modules, and middle frame joints, to accurately detect local compressive performance; It can also achieve full screen uniform pressure and simulate situations of comprehensive pressure.

itemeye	explanation
main purpose	Simulate scenarios where mobile phones and other products are repeatedly sitting and pressed, and evaluate their performanceStructural lifespanandstress resistance.
Core testing standards	Usually meetsYD/T 1539-2006Industry standards.
Typical testing conditions	-pressure: About250±10 N(Approximately 17kg) -pressure head: Specific lengthRound bar aluminum material -frequency：15-30 times/minute(Adjustable range is usually wider) -frequencyFor example:1000 times
Common working frequency	10-60 times per minute.
Evaluation method	Check the phone after testingFunction, appearance, and assemblyIs it normal and meets the standards