Mobile high and low temperature thermal shock test chamber

Dongguan Kewen Experimental Equipment Co., Ltd. provides you withMobile high and low temperature thermal shock test chamberNew news. Dongguan, Huizhou, Shenzhen, Guangzhou, Zhuhai, Zhongshan. Just buy a high and low temperature cold shock box and find Kewen Instrument!

Mobile high and low temperature thermal shock test chamberProduct Features:
The sample tank adopts a mobile hanging basket, and the test sample is dynamic. Test (sample area): 1. Test method: The upper part of the test chamber is the high temperature zone, and the lower part is the low temperature zone. The test piece is placed in a suspended basket, which alternates between the high temperature chamber and the low temperature zone.
The heat storage method can avoid occupational injuries to users.
Adopting a touch sensitive color LCD display human-machine interface controller, the operation is simple and easy to learn.
Temperature control accuracy is achieved through PID automatic calculation control.
You can choose the starting position and start cycling at high or low temperatures.
It has a reservation start function.
Can set the number of cycles and automatic defrosting.
Operation status display.
Explanation of abnormal or faulty display and troubleshooting methods.
Air cooled cold shock machine/water-cooled cold shock test box, choose from Kewen Renjun.

KOWINTEST High and Low Temperature Thermal Shock Test Chamber

Technical parameters:
Basket size: 50 * 50 * 40
A. Temperature range of high and low temperature zones:
1. High temperature zone: 60 ℃ -200 ℃
2. Low temperature zone: -10 ℃ -70 ℃
B. Temperature testing range:
1. High temperature: 60 ℃ -150 ℃
2. Low temperature: -10 ℃ - -55 ℃
C. Analysis accuracy: 0.1 ℃
D. Control accuracy: ± 1 ℃
E. Distribution uniformity: ± 3 ℃
F. Heating time in high temperature zone: from room temperature to 200 ℃, about 65 minutes
G. Cooling time in low-temperature zone: from room temperature to -70 ℃, about 70 minutes
H. Temperature recovery time in the testing area: approximately 5 minutes

Insulation material: high temperature resistant, high-density oxyformate ethyl acetate foam insulation wire
System: P.I.D+S.S.R+microcomputer balanced temperature control system
Freezing system: Semi dense two-stage compressor (water-cooled)
Protection devices: no fuse switch, compressor high and low pressure protection switch, refrigerant high pressure protection switch, fault warning system, electronic alarm
Accessories: Two adjustable upper and lower partitions
Power supply: 380V AC

Dongguan Kewen Testing Equipment Co., Ltd., a manufacturer of environmental test chambers, specializes in the production and sales of high and low temperature test chambers, as well as high and low temperature wet heat test chambersThree boxes of cold and hot shock test boxesEquipment such as constant temperature and humidity chamber, rapid temperature change test chamber, walk-in high and low temperature test chamber, temperature humidity vibration three comprehensive test chamber, electromagnetic vibration table, UV aging test chamber, and IP rain level test chamber.