5 degrees per minute high and low temperature rapid temperature change test chamber

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The rapid temperature change test chamber is suitable for conducting environmental simulation reliability tests such as high and low temperature constant and gradient, wet and heat tests on various electrical and electronic products, as well as other products, components, and materials.

Product Details

Rapid temperature change test chamberScope of application:

Rapid temperature change test chamberThis equipment is suitable for conducting environmental simulation reliability tests such as high and low temperature constant and gradient, wet and heat tests on various electrical and electronic products, as well as other products, components, and materials.

Rapid temperature change test chamberProduct Parameters:

model			KW-KS-100	KW-KS-150	KW-KS-225	KW-KS-408	KW-KS-800	KW-KS-1000
Nominal internal volume (liters)			100	150	225	408	800	1000
performance	temperature range		T：-20~+150℃		F：-40~+150℃		S：-70~+150℃
	humidity range		(25~98)%RH/(20~70)℃
	temperature fluctuation		±0.5℃
	temperature deviation		±2.0℃
	Humidity deviation		±3.0%RH（＞75%RH） ±5.0%RH（≤75%RH）
	Range of temperature change rate		5/10/15℃/min
internal dimensions （mm）		W	500	600	600	800	1000	1000
		H	500	500	750	850	1000	1000
		D	400	500	500	600	800	1000
external dimensions （mm）		W	930	1070	1070	1230	1430	1560
		H	1650	1670	1670	1880	2150	2150
		D	950	1050	1050	1150	1350	1810
Environmental temperature for use			+5~+35℃
material	shell		Double sided galvanized steel sheet, surface spray treated
	Internal body		Stainless steel plate SUS304
	adiabatic		Rigid polyurethane foam+glass fiber
regulator	heater		Nickel chromium alloy electric wire heater
	humidifier		Stainless steel armored heater (heating and humidification method)
	fan		centrifugal fan
	refrigeration compressor		Piston compressor
	refrigerant		R404A/R23
control manufacture device	monitor		7-inch TFT color LCD display
	Operation mode		Program setting and fixed value method
	Setting method		Chinese menu, touch screen input
	Program capacity		Editable: 20 programs. Each program has a maximum of 50 steps and can have 20 loops (with a maximum of 99 loops per loop step); Fixed: 10 programs; The program can be connected.
	input		thermocouple
	communication function		RS-232 interface with local and remote communication capabilities
	Curve recording function		Can save the set values, sampling values, and sampling time of the device
	Supplementary functions		Fault alarm and cause, processing prompt function; Fault records; Overtemperature protection; Upper and lower temperature protection; Power outage protection; Test pause; Alarm output; Timer function (automatic start and automatic stop operation).
power supply			AC (380 ± 38) V (50 ± 0.5) Hz three-phase four wire+protective earth wire
Standard Configuration			One transparent electric heating film glass observation window, two test holes (customized according to actual size), one lighting lamp, four casters, one cable, and two shelves.
security configuration			Refrigeration system: compressor overpressure, compressor motor overheating, compressor current, cooling water supply under pressure Test box: Over temperature protection, temperature fuse, fan motor overheating Other: Main power phase sequence and phase loss protection, leakage protection, load short circuit protection

Dongguan Kewen Experimental Equipment Co., Ltd. specializes in sales and productionHigh and low temperature test chamber、High and low temperature damp heat test chamber、constant temperature and humidity chamber、Rapid temperature change test chamber、Walk in high and low temperature test chamber, temperature and humidity vibrationThree comprehensive test chambers, electromagnetic vibration table, UV ultraviolet aging test chamberandIP Rain Level Test ChamberWaiting for equipment.

quality assurance
Provided by the supplier5 degrees per minute high and low temperature rapid temperature change test chamberThe product is brand new, and the overall system comes with a one-year quality guarantee, starting from the date of user acceptance.
Installation and debugging:
After signing the contract, the supplier shall provide the user with the equipment foundation diagram. After the equipment is in place, skilled personnel will be arranged to install and debug it on site (with the user assisting in the system installation).
Technical training:
Responsible for providing on-site training to users during the installation and commissioning process of the rapid temperature change test chamber equipment, and meeting the training requirements proposed by users based on actual situations until they can proficiently operate the equipment.
After-sales service
Within the warranty period, we will respond within 2 hours after receiving user fault information, troubleshoot within 48 hours, and provide free replacement of damaged parts and services. The after-sales service outside the warranty period is the same as the promise made during the warranty period, but the user bears a certain cost.
Kewen will visit users regularly or irregularly to provide experimental technology consultation, so as toUsers benefit the most from it.