Mitutoyo external micrometer 293-141-40 from Japan

Mitutoyo external micrometer 293-141-40 from Japan

293 series

high-speed·High precision digital micrometer QuantuMike MD-E

1、 Characteristics:

1. The feed rate of the micrometer screw is based on the standard micrometer4Even with multiple measurements, it can be easily handled.

2. The proximity speed warning function can detect collisions with workpieces caused by excessive speed. Even beginners can achieve stability

Accurate measurement results.

3. Through the calculation function, the compensation value for the machining machine can be calculated based on the measurement results. It can save the trouble and errors of calculation,

Helps reduce processing defects.

4. The calibration date warning function helps with proper management of measurement tools.

5. Supports bidirectional serial communication.

2、 Function:

1.Preset function:Set the measurement origin for the ABS absolute measurement system. The measurement origin can be preset to any value to adapt to various situationsworkItem.

2.Zero setting functionThe INC incremental measurement system can clear the display value (set to zero) at any position for easy comparison and measurement. After setting to zero，It can also restore the absolute value from the origin(ABS length measurement system).

3.Maintain functionalityCan maintain display values for easy measurement in difficult to see locations. In addition, when released, the measurement value from the previously set zero position or origin position will be displayed.

4.Calibration date warning function ：

Display calibration day warning when the calibration date is approaching. Prevent calibration omissions and support reasonable management of measurement tools.

5.Approaching speed warning function ：

Suppress fluctuations in measurement values and improve measurement reliability. Tolerance judgment functionDistinguish whether the measured value is within the range of the upper and lower tolerance limits, and display the tolerance judgment mark.

6.Function lockThis feature allows locking the origin (origin setting) and zero (zero setting) functions to prevent these points from being accidentally reset.

7.Automatic power supplyIf the on/off button is not used for about 20 minutes, the reading on the LCD screen will disappear, but the origin will be saved. Rotate the micrometer screw to make the reading on the LCD screen appear again.

8.Button customization functionAssign commonly used functions to each button, which can be easily accessed to improve work efficiency.

9.measurement dataThe output function includes measurement data output function, which can establish statistical process control system and measurement data network system.

fault signalingIf there is overflow or calculation error on the LCD display screen, the error message will appear on the LCD display screen,

The measurement function has stopped. This will prevent the instrument from giving incorrect readings. When the battery voltage drops below a certain value and the measurement cannot be carried out normally, the low battery voltage alarm signal will appear to remind the user to replace the battery.

Mitutoyo external micrometer 293-141-40 from Japan