Mitutoyo Japan Mitutoyo 547-401A Digital Thickness Gauge

Mitutoyo Japan Mitutoyo 547-401A Digital Thickness Gauge

Introduction:

Thickness Table

7, 547 series

Product Introduction:

Simply press lightly to quickly measure the thickness of small parts, paper, felt, etc.

For models using ceramic probes and anvils, there is no need to worry about rusting. (Except for No.547-401A)

The waterproof components of the bezel and cover can prevent water or oil from seeping into the indicator.

Lens thickness measurement

Can measure the thickness of concave convex lenses and concave convex surfaces. (Probe, anvil: quenched steel)

When measuring the thickness of a flat surface, it is necessary to replace the measuring anvil for use.

Equipped with a spherical probe.

Thickness measurement of pipe fittings:

It can measure the thickness of the pipe wall and the thickness of the bent plate. (Probe, anvil: quenched steel)

Groove depth measurement:

Very suitable for measuring narrow grooves on circular objects.

The measuring surface of the probe and anvil is a blade shaped installation with a thickness of 1mm.

Thickness Table 547-401A of Mitutoyo, Japan

Specifications

● Display: 6-digit LCD display, symbol

Power supply: 1 lithium battery CR2032 (standard accessory for digital display)

● Battery life: Approximately 2700 hours of continuous use, typically around 2.5 years of use

MAX response speed: unlimited (does not support scanning measurement)

■ Function

● Zero point setting (INC incremental measurement system)

● Origin setting (ABS absolute measurement system)

● Counting direction conversion

● Tolerance judgment function

Resolution switching function (only applicable to models with a resolution of 0.0005mm)

Calculate the function f (x)=Ax

● Function lock

Calibration mode warning

● Data output function

● Display value retention function (when the connecting wire is not connected)

● Display rotation function (330 º)

● Low voltage warning display

● Error Warning

■ Optional (only for digital display type)

● Connection line

1m:No.06AGL011

2m:No.02AGL021

● USB direct data input tool

USB-ITN-SF (2m): No.06AGQ001F (Note 1: USB-ITN-SF is required for each ID)

Measurement data acquisition software USB-ITPAK V3.0: No.06AGR543

Note 2: The software can be downloaded from.

Input Tool Measurement Data Input Device

USB keyboard signal conversion device IT-020U:

No.264-020

RS-232C communication conversion type IT-007R:

No.264-007

● U-WAVE-T dedicated connection cable

Standard (160mm): No.02AZG011

Foot switch: No.02AZG021

● Digimatic microprocessor DP-1VA LOGGER:

No.264-505DC

Mitutoyo Japan Mitutoyo 547-401A Digital Thickness GaugeSpecification Table: