Microwave Muffle Furnace

Microwave Muffle FurnaceMain parameters:

1. Voltage: 220 ± 10V, 50Hz;

2. Rated power: 3KW~5KW;

3. Microwave output power: 0.01-1.40KW, 0.01-2.80KW continuously adjustable;

4. Microwave frequency: 2.45GHz;

5. Extreme temperature: 1600 ℃;

6. Continuous operating temperature: 1550 ℃;

7. Heating space: 130 x 80 x 70mm (length x width x height), 140 x 140 x 100mm (length x width x height);

8. Heating rate: rapid heating, with an average heating rate of ≥ 20 ℃/min;

9. Temperature measurement method: thermocouple; Temperature measurement range: 0-1600 ℃; Temperature control accuracy; Reading ± 0.1%;

10. Control system: automatic control, manual, constant temperature mode, PLC+touch screen, 40 segment adjustable process parameters, with data storage, exporting experimental data; Real time display of curves; Dynamic data screensaver;

11. Security system

1.1. Microwave leakage prevention: Microwave leakage level<0.5mW/cm2;

1.2. Magnetron alarm: over temperature alarm, over-current alarm;

1.3. Furnace door protection alarm: Close the furnace door tightly with the protection switch;

12. Equipment external dimensions

12.1. Main body: approximately 750 x 550 x 650mm (length x width x height), approximately 850 x 650 x 750mm (length x width x height);

12.2. Floor area:<0.5 ㎡,<1 ㎡.

Microwave Muffle FurnaceMain application areas:

1. Synthesis of Inorganic Powder:
① Electronic ceramic powders: barium titanate, strontium barium titanate, strontium titanate, zirconium barium titanate, etc;
② Positive electrode materials for lithium-ion batteries: lithium cobalt oxide, lithium manganese oxide, etc
③ Various pigments, glazes, inorganic pigments, etc
④ Its inorganic powders include manganese trioxide, lithium yttrium oxide, zinc ferrite, tricolor fluorescent pink powder, glass, cement, etc
2. Sintering of electronic ceramics: varistors, thermistors, piezoelectric ceramics, microwave dielectric ceramics, etc
3. Sintering of oxide ceramic materials: alumina, zirconia, magnesia and other oxide composite materials, etc
4. Sintering of magnetic materials: Ni Zn ferrite, gyromagnetic ferrite, etc
5. Ashing, incineration, and burning test