Microfluidic chip processing equipment - DIPPER - convenient coating equipment

Microfluidic chip processing equipment - DIPPER - convenient coating equipment

Microfluidic chip processing equipment - DIPPER - convenient coating equipment

A plastic rack with a container that can hold multiple glass slides at the same time. It can be used for incubating glass slides in solution, such as anti adhesive coatings for micro pattern experiments.

>Homogeneous coating

Small in size but very preciseThe device is capable of uniformly coating all glass slides

>Standardize your glass slide handling

Always use the same conditions, and the coating steps will not change

>Multi functional device

Can be used for coating, cleaning, and drying

The dimensions are 4.2 cm x 1.7 cm x 3 cm. It consists of a frame that allows for high-precision positioning of glass slides and a container into which the frame should be immersed.

It consists of two main parts:

Save paint solutionThe size allows for a large loading capacity of 1.8 mL, which can be reused after immersion.

standardizationThe spacing between glass slides should allow the coating solution to flow upward under capillary forces, ensuring that the coating on all slides is uniform and even

can accommodate4or50A slideshow. You can request custom sizes to have different accommodating capacities.

How to use Dipper

1.Place the slides in the correct position.

2.Add 2 mL of reagent to the tray and place another part of the equipment into the traySlides*Immersion. Incubate for 30 minutes.
The distance between each point causes the product to remain between the slides during the cultivation process due to capillary force.

3.Use the bottom of Dipper as a container and rinse with distilled waterSlides. Usenitrogendry.

4.Remove with tweezersSlidesThen continue with the normal experiment.