Micro plant grinder experiment teacher uses

FZ102Miniature plant pulverizerMicro plant grinder experiment teacher uses

1Overview

Micro plant grinder experiment teacher usesThis grinder from Shanghai Jingpai brand is used in experimental industries such as industry, agriculture, science, and medicine. It can crush the skin, hair, and meat of various plants and animals, and is used to determine the moisture, protein, and oil content of grains such as wheat, rice, beans, and other crops.

IIstructural characteristics：

This machine uses the rotation of a rotating blade to form a cutting surface on a fixed blade for crushing. It has the characteristics of small size, light weight, compact structure, and high efficiency.

three、Crushing data of some grain crops

4Micro plant grinder experiment teacher usesspecification：

1Input voltage:220V 2Motor power:250W 3Speed:1400r/min

4Diameter of the crushing chamber102mm 5Inner diameter of sieve hole:0.5,1.0,1.5mm 6Working hours:Continuous working principle

7Crushing effect(eye):60-120 8Total weight1.5KG 9Dimensions: Length300mmwide180mmtall290mm

5Micro plant grinder experiment teacher usesUsage：

Take representative samples50Put the sample into the feeding hopper, cover it with the hopper cover and turn on the power to ensure normal operation of the machine. Then, open the hopper suction plate to slowly drop the sample into the crushing chamber. Close the hopper cover, and the sample will be crushed and fall into the container through the sieve for testing. The stainless steel medicinal material crusher mainly relies on the impact of a hammer to crush, and after screening through a sieve, the qualified powder is obtained.

VIMicro plant grinder experiment teacher usesIdeas and matters：

1Do not place metal, stones, or other objects to avoid damaging the blades;2The capacity of the container is50Ke, please do not over invest at once;3After use, the crushing chamber must be cleaned thoroughly to prevent rusting and deterioration;4As the machine is coated with rust proof oil in the crushing chamber during the storage of finished products, please wipe it clean with a dry cloth before use to avoid affecting the fineness of the crushed material and the sieve funnel:

Standard Operating Procedure for FZ102 Micro Plant Grinder

1、 Preparation before operation (mandatory)

1. Equipment inspection

Confirm that the equipment is placed steadily, grounded reliably, and the power cord is not damaged

Check that there are no residual materials/foreign objects in the crushing chamber, feeding hopper, and hopper

Check that the rotating blade and sieve are intact without cracks, and that the fasteners are not loose

Install the corresponding screen according to the requirements (0.5/1.0/1.5mm)

2. Material preparation

The material must be dried (grain moisture<15%) to remove hard objects such as metals and stones

Single feeding ≤ 50g, material diameter should not be too large

3. Personal protection

Wear a dust mask, protective goggles, tie the cuffs tightly, and tuck long hair into the hat

2、 Startup and crushing operation

1. No load test machine

Cover the hopper tightly, connect the 220V power supply, and run it without load for 1-2 minutes

Observation: No abnormal noise or vibration, correct steering, smooth operation

2. Formal crushing

After the empty load is normal, put 50g of material into the feeding hopper and cover the hopper tightly

Slowly open the hopper suction plate to allow the material to slowly fall into the crushing chamber, and then close the suction plate

Wait for all the materials to pass through the sieve and fall into the feeder, completing the crushing process

3. Operation monitoring

Observe the entire process and immediately stop the machine if there is abnormal noise, severe vibration, or motor overheating

It is strictly prohibited to open the cover, reach into the crushing chamber, or forcefully feed during operation

3、 Shutdown and Cleaning

1. Shutdown steps

First, turn off the power switch. After the device stops running, unplug the power plug

Take out the container and collect crushed samples

2. Cleaning and maintenance

Open the crushing chamber and clean the residual material with a brush to ensure there is no accumulation of material

Wipe the body, keep it dry, and prevent rust

Regularly check the wear of blades and screens, and replace vulnerable parts in a timely manner

4、 Safety and Precautions

It is strictly prohibited to start the machine with materials, over feed, or crush damp/viscous materials

Single continuous operation should not be too long. It is recommended to use intermittently to avoid motor overheating

Only used for crushing plant/grain samples, prohibited from handling hard objects such as metals and glass

Maintenance and cleaning must be carried out by cutting off the power and waiting for the equipment to come to a complete stop before proceeding

5、Micro plant grinder experiment teacher usesIdeas must be grounded.