MeterLink - Advanced Ultrasonic Flow Meter Diagnostic Program

MeterLink (Daniel's ultrasonic flowmeter diagnostic software) provides fluid parameter information, allowing users to easily obtain professional flow analysis results, reminding operators to pay attention to abnormal flow information, and providing corrective action recommendations. It adopts advanced monitoring and alarm functions

MeterLink (Daniel's ultrasonic flowmeter diagnostic software) provides fluid parameter information, allowing users to easily obtain professional flow analysis results, reminding operators to pay attention to abnormal flow information, and providing corrective action recommendations. It adopts advanced monitoring and alarm functions to issue maintenance alerts, prevent faults from occurring, and extend normal operation time; Quickly eliminate flow meter faults and reduce downtime through advanced diagnostic techniques. MeterLink v1.31 supports:

Microsoft Windows Vista, 7, 8.1, and 10

Microsoft Office 2003 - 2016

Use MeterLink to enable the continuous flow analysis function of the flowmeter

When your Daniel ultrasonic flowmeter is equipped with Continuous Flow Analysis (CFA) function, MeterLink not only allows you to access more data, but also provides actionable key information. This information is displayed in an intuitive graphical format, simplifying the flow measurement process.

Operability Alert - Operability alerts not only help users determine abnormal flow conditions, but also provide information on upstream blockages, sediment accumulation in flow meters, and the presence of liquid hydrocarbons in gas pipelines.

Baseline Viewer ™ - Generate predictive alerts based on deviations from benchmark values. The benchmark value can be determined in the calibration laboratory or during initial start-up, triggering an alarm to identify installation issues that can increase measurement uncertainty, allowing operators to avoid unexpected shutdowns or process disruptions.

PlantWeb ® Alarm - also available through Emerson's AMS ™ Suite (Smart Device Manager) provides access to advanced diagnostic programs for Daniel ultrasonic flow meters. This predictive maintenance software utilizes enhanced EDDL functionality to provide consistent graphical information on various Emerson smart meters. Factory personnel can use the process overview to quickly detect and respond to abnormal situations. Users can easily access AMS in the maintenance room ™ The device manager can configure the ultrasonic flowmeter online, or use the 375/475 handheld communicator on site to complete the configuration.

Equipped with MeterLink, Daniel ultrasonic flowmeter can provide continuous flow analysis function and generate the following operable alarms in gas flow applications:

Abnormal flow state

Upstream blockage

Accumulation of dirt inside the hole

Reverse traffic

Liquid hydrocarbon detection

Sound velocity verification (comparison between AGA 10 and measured values)

Operable alarms can be accessed through the following channels:

MeterLink software

Emerson's AMS ™ Suite and 375/475 Field Handheld Communicators

Modbus serial and TCP/IP communication

MeterLink's Baseline Viewer provides users with an overview of key flow parameters, including lateral flow, vortex, symmetry, fluid disturbance, flow profile coefficient, and average flow velocity, to help determine factors that affect flow measurement. ​​​​​​​​​​​​​​​​

MeterLink is a Windows based software that is essential for configuring transmitters

Supports Microsoft Windows 7, Vista, XP, and Office 2007-2010

Backward compatibility and support for gas and liquid ultrasonic flow meters

Require RS-232, RS-485 full duplex or Ethernet (recommended)