Material flowability, powder flowability FT-104BA powder particle flowability analyzer (multifunctional type) Overview: FT-104BA powder particle flowability analyzer is independently developed by Ruike Instrument Company ROOKO. It analyzes the influence of pile angle and time on flowability in powder and particle flowability analysis; Adopting high-precision chip control technology, automatic measurement of angle and time, improving the shortcomings of traditional measurement methods, and providing accuracy and degree requirements for sample testing. This instrument mainly consists of a control part and an experimental part. The machine meets the requirements of angle of repose measurement, flow time determination, natural bulk density, and the relationship between time and quality; The relationship between volume and time, the mixing system adopts low-noise motor control, and the mixing speed is adjustable; So as to ensure that the sample flows evenly out of the funnel and fills the container; When the experiment is completed, the angle of repose is directly measured by a laser probe without manual calculation. The angle of repose is automatically calculated and the test results are printed. Multiple specifications of convertible funnels are configured to meet different experimental requirements. Optional: If equipped with software, the flow time, angle of repose measurement process, and relationship curve can be displayed to meet the analysis function of the sample. The standard requirements for FT-104BA powder particle flowability analyzer are to meet the requirements of GB11986-89 and ISO4324-1977 "Determination of angle of repose of surfactant powders and particles"; Meet the regulatory requirements of the Chinese Pharmacopoeia, USP (United States Pharmacopeia), BP (British Pharmacopoeia), and EP (European Pharmacopoeia); Reference standard: DIN ISO 4324- December 1983; Analyze the angle of repose of particles to examine their flowability, etc. Generally, the angle of repose is around 30 ° FT-104BA powder particle flowability analyzer parameters: 1. Funnel: composed of multiple convertible funnels configured with cylindrical measuring cylinders. The funnel material is made of stainless steel and has sufficient wall thickness, hardness, smoothness to prevent deformation and excessive wear. 2. Convertible funnel diameter mm: 7.0; 8.0； 9.0； 10；14； 15；16； 17；18； 25 (optional according to user needs) 3. Time range: 0-99999S can be set arbitrarily 4. Weighing range: 0-2000g; accuracy: 0.01g 5. Funnel volume: 200ml 6. Equipped with receiving container volumes: 200ml, 250ml, 500ml (optional according to user needs) 7. Angle of repose measuring disc: diameter 100mm; Automatic mixing device solves the problem of poor particle flowability and difficult flow. 8. The funnel outlet is equipped with a control valve. 9. Configure a computer (optional) software to display the test process curve: time, mass, volume, density, shear and other relationship curves. 10. Shear strength testing function. 11. Input: 220V ± 10% for use in normal temperature environment. There are also related products: FT-102B powder flowability and density tester; FT-102BA microcomputer powder flow and density tester; FT-104BA powder particle flowability analyzer (multifunctional type); FT-104BC powder particle flowability analyzer (practical); FT-2000A Particle and Powder Characteristics Analyzer (Multi functional Type); FT-2000B Particle and Powder Characteristics Analyzer (Practical)
