Material characteristics of C94400 tin bronze

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

C94400 tin bronze is widely used in industrial equipment fields such as generator sets, shipbuilding, seawater desalination, nuclear industry, and petrochemical equipment. In the field of mechanical manufacturing, various force bearing parts can be manufactured through deep drawing and bending, such as pins, rivets, washers, nuts, conduits, pressure gauge springs, screens, radiator parts, etc; It can also be used to manufacture parts that require high strength and corrosion resistance, such as valves, pump parts, gears, etc. It is also suitable for making elastic components and wear-resistant parts.

Product Details

Comprehensive Introduction to C94400 Tin Bronze

1、 Chemical composition

The chemical composition (mass fraction) of C94400 is usually:

Copper (Cu): approximately 81.0% -85.0% (balance)

Tin (Sn): 7.0% -9.0%

Lead (Pb): 6.0% -8.0%

Antimony (Sb): up to 1.5%

Phosphorus (P): up to 0.35%

Zinc (Zn): up to 0.25%

Aluminum (Al): up to 0.01%.

2、 Physical performance

Elastic modulus: Approximately 26.0 × 10 ³ ksi at room temperature.

The coefficient of thermal expansion is 7.70 × 10 ⁻⁶ in/in/° F on average between 70-200 ° F (21-93 ° C).

Electrical resistivity (68 ° F): 307.0 ohm cir mil/f.

Density: Approximately 0.319lb/in ³ or 8.84g/cm ³.

3、 Mechanical performance

Yield strength (Rp0.2): ≥ 717MPa.

Tensile strength (Rm): ≥ 168MPa.

Impact attribute: KV/Ku (J) ≥ 11.

Elongation rate (A): ≥ 34%.

Brinell hardness (HBW): 322.

4、 Characteristics

（1） Mechanics and Processing Characteristics

Good casting performance: It is a non-ferrous metal alloy with low casting shrinkage, which can be used to produce castings with complex shapes, clear contours, and low requirements for airtightness.

Higher mechanical properties: It has higher mechanical properties such as strength and toughness, and overall has higher performance than ordinary copper. Its strength and toughness, physical properties, chemical composition, biocompatibility, and process performance are all reflected.

Easy to process: This alloy is easy to cut, has good brazing and welding performance, small shrinkage coefficient, and is non-magnetic. Bronze bushings, shafts, etc. can be prepared using wire flame spraying and arc spraying.

（2） Corrosion resistance

It is highly corrosion-resistant in the atmosphere, seawater, freshwater, and steam, and is widely used in the production of components such as steam boilers and marine ship parts that require corrosion resistance.