Marble drilling module platform

Marble platform, marble punching module platformOn the basis of the original granite platform, drilling, slotting, finding parallelism and flatness are carried out according to the actual needs of customers. The overall technical requirements are much stricter than those of ordinary granite platforms. Marble mechanical components are mostly used as fixtures in the machinery industry, so they are called marble mechanical components or granite components. Resistant to wear and corrosion, able to withstand high temperatures, physically stable, with a meticulous structure, grain shedding upon impact, no burrs on the surface, and no impact on its flatness accuracy. Granite measuring plates. The working surface is easy to maintain during use, with stable material, low coefficient of linear expansion, good mechanical accuracy, no deformation, high hardness, and strong performance, suitable for the working environment on site. During measurement, it can slide smoothly without any discomfort. The measurement of the working surface is accurate, and general scratches do not affect the measurement accuracy. Granite components are made of stone and have the characteristics of non rusting and good service life.

Qualified granite slabs should meet four physical performance indicators

Bulk density ≥ 2.56g/cm3

Water absorption rate ≤ 0.60%

Dry compression degree (compressive strength) ≥ 100MPa

Bending degree (bending resistance) ≥ 8.0MPa

Qualified marble slabs should meet four physical performance indicators

Bulk density ≥ 2.60g/cm3

Water absorption rate ≤ 0.5%

Dry compression degree (compressive strength) ≥ 50MPa

Bending degree (bending resistance) ≥ 7.0MPa

Marble platform,Marble drilling module platformThe method of using the car is as follows:
Marble is usually transported by forklifts, it depends on the forklift operator's skills and sense of responsibility, handle with care. Basic rules need to be followed when handling and loading/unloading stone materials:
1. When transporting, it should be handled with care and rolling is strictly prohibited. When stacking upright, the back edge must first touch the ground.
2. When the area of a single stone slab exceeds 0.25_, it must be transported vertically. When transporting large products with lifting tools, the stressed edges must be padded.
3. When using lifting equipment to load and unload products packaged in wooden boxes, it is advisable to lift one box at a time. When handling products packaged with grass ropes, do not lift the grass ropes.
4. Loading and stacking should be carried out according to storage requirements, and transportation should be smooth and collision is strictly prohibited


Our company can process granite (marble) bases, columns, beams, guide rails, gantries, etc. for various measuring machines, semiconductors, lithium batteries, lasers, aerospace, precision machining, etc.
Our precision granite (marble) measuring tools generally include: testing platform, ruler, square ruler, square box, V-shaped block, measuring table, etc., suitable for various high-precision inspection and testing work, such as machine tool worktable, guide rail, workpiece straightness, flatness, verticality, parallelism.

marble platformDue to its high precision, stability, and wear resistance, it is widely used in fields such as mechanical processing, optical measurement, and precision testing. To ensure its long-term flatness and accuracy, the following systematic maintenance standards should be followed:

1、 Daily cleaning and basic maintenance

Surface cleaning

Instant cleaning: After each use, use a soft bristled brush or vacuum cleaner to remove metal shavings, dust, oil stains, and other debris to avoid scratches caused by hard objects (such as wire brushes).

Stubborn stain treatment: In case of oil stains or glue marks, neutral cleaning agents (such as dishwashing detergent) can be mixed with warm water and gently wiped with a soft cloth. It is forbidden to use acidic (such as hydrochloric acid) or alkaline (such as sodium hydroxide) highly corrosive cleaning agents.

Drying treatment: Immediately wipe dry with a dry soft cloth after cleaning to prevent moisture from seeping in and causing cracking or discoloration.

Dust and pollution prevention

Use dust covers or enclosed workbenches in dusty environments to avoid the attachment of pollutants generated during painting, welding, and other operations.

2、 Corrosion and chemical protection

Chemical substance isolation

It is strictly prohibited for the platform to come into contact with acid, alkali, or salt solutions (such as sulfuric acid, sodium hydroxide, and sodium chloride solutions). If accidentally touched, immediately rinse with plenty of water and clean with neutral detergent.

The metal support structure needs to be regularly coated with anti rust oil to prevent rusting from affecting the stability of the platform.

Environmental humidity control

Keep the environmental humidity between 40% -60% to avoid sudden changes in humidity that may cause marble to absorb moisture, expand, or crack due to dehydration.

3、 Measures to prevent physical damage

Scratch and collision prevention

When placing workpieces or tools, place soft materials (such as rubber pads, felt) on them to avoid direct contact with hard objects. When carrying heavy objects, use lifting equipment or soft ropes, and it is forbidden to strike the surface of the platform with hammers or files.

Protective strips need to be installed at the edge of the platform to prevent damage caused by collisions.

Temperature stability management

Avoid long-term exposure to high temperatures (such as direct sunlight) or low temperatures (such as frozen environments), and temperature changes should be controlled within ± 5 ℃ to prevent deformation caused by thermal expansion and contraction.

4、 Regular calibration and precision maintenance

Professional calibration

According to the frequency of use, contact professional institutions every 6-12 months for flatness and verticality calibration, and use laser interferometers or level gauges for testing to ensure accuracy meets standards.

Clean the platform before calibration to avoid stains affecting the test results.

Self inspection and status monitoring

Regularly use a level or laser interferometer for self inspection, record data to monitor the platform status. If local dents or edge wear are found, stop using immediately and send for repair.

5、 Long term storage and special scenario handling

Long term storage standards

Place horizontally in a dry and ventilated environment, avoiding tilting or stacking. Cover with a dust cover or plastic film to prevent dust and moisture from entering.

Regularly inspect during storage to ensure no deformation or contamination.

Special environmental response

In humid environments, desiccants can be placed to absorb moisture; In high-temperature environments, use insulation materials to block direct sunlight.

If the platform is used for high-precision measurement, it should be used in a vibration free environment to avoid vibration affecting accuracy.

6、 Emergency response and repair

Scratch repair

Minor scratches can be lightly sanded with fine sandpaper (such as 2000 grit) and then coated with marble specific repair agent. Deep scratches require professional repair.

Crack repair requires filling with epoxy resin and polishing to match the original surface.

Corrosion treatment

If the surface is corroded, it should be immediately cleaned with a neutral cleaning agent, and the corroded area should be filled with a professional repair agent, and if necessary, re polished.