Marble and Granite Testing Platform

Marble and Granite Testing Platform

Granite is a type of tectonic rock formed by the melting of volcanic lava under considerable pressure, which rises to the surface of the earth's crust. The magma does not erupt from the ground, but slowly cools and solidifies underground. It is a deep-seated acidic igneous rock and belongs to magmatic rock (igneous rock). Granite is mainly composed of quartz, feldspar, and mica. The content of feldspar is 40% -60%, and the content of quartz is 20% -40%. Its color depends on the type and quantity of its components. The rock is hard and dense.

Reduce steps and time during the installation and debugging process of acute equipment to prevent vibration. Ideal images can be quickly obtained during optical sensor detection. Provide stability of markers for quick browsing, scanning, and detection. Reduced the vibration generated during high-speed machining, thereby improving the machining accuracy of the workpiece;

Marble and Granite Testing PlatformFlexible design and manufacturing, molds can be combined with the following products.

The excellent performance of granite components reduces costs and eliminates the need for secondary and machining costs; Minimize the use of expensive structural materials as much as possible; Integrating complex components and diversifying mechanisms to reduce the number of system parts and equipment time; Heat resistance: Compared with metal castings, it can reduce the coefficient of expansion; Small heat resistance gradient

The purpose of finely grinding the surface of marble mechanical components is to further refine the flatness of the semi finely ground surface to a level of precision. The purpose of manual precision grinding of marble inspection mechanical components with precision is to further refine the precision directly to the required precision level. The marble inspection mechanical components, which have been finely ground to standard accuracy, were polished. The polished marble inspection mechanical components have a smooth surface, are not easily worn, and have a low surface roughness value, confirming that the accuracy is stable and the marble mechanical components have been completed. First, roughly grind the mechanical components of the marble inspection that require repair, with the intention of roughly grinding the thickness and flatness of the marble inspection mechanical components to the standard. After rough grinding, the marble mechanical components are subjected to secondary semi fine grinding, with the intention of removing deeper scratches to achieve the standard flatness. After the initial adjustment is qualified, let it stand for 12 hours before copying. If it is unqualified, it needs to be adjusted again. If it is qualified, it can be used.