Magnetic flap level gauge

NegotiableUpdate on 12/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The UHZ-80 series magnetic flap level gauge operates based on the principles of buoyancy and magnetic coupling. When the liquid level in the tested container rises or falls, the float in the main tube of the level gauge also rises or falls accordingly. The magnetic steel inside the float is transmitted to the on-site indicator through magnetic coupling, driving the red, white (black) flip column or flip plate to flip 180 amp; amp; amp; amp; #176;

Product Details

▲ Overview

UHZ-80 seriesMagnetic flap level gaugeIt is a product developed and produced by the company by introducing similar foreign products and improving them. The series of products can achieve high sealing, leak prevention, and safe and reliable measurement of liquid level under high temperature, high pressure, high viscosity, and strong corrosive conditions. The entire process measurement has no blind spots, eye-catching display, intuitive reading, and a large measurement range. Equipped with liquid level alarm and control switch, it can realize upper and lower limit alarm of liquid level or boundary. Paired with LB type liquid level transmitter, it can convert liquid level and boundary signals into two-wire 4-20mADC standard signals, realizing remote measurement, indication, recording, and control. The series of products are widely used in industries such as petroleum, chemical, power, medicine, environmental protection, metallurgy, water treatment, etc.

▲ Structural principle
UHZ-80 seriesMagnetic flap level gaugeIt works based on the principles of buoyancy and magnetic coupling.
▲ Basic parameters
Measurement range L: 200-12000mm
Measurement accuracy: ± 10mm
● Medium temperature: 0-480 ℃
Medium specific gravity: ≥ 0.4
● Operating pressure: 0-32MPa
● Medium viscosity: ≤ 0.02Pa. S
● Connecting flange: according to technical parameters
Technical parameters: according to design or user requirements
▲ Installation and use
1. Firstly, check whether the data on the level gauge label matches the ordering requirements. There should be no excitation iron or other magnetic substances within 200mm of the level gauge, otherwise it will affect the normal operation of the level gauge.
2. A shut-off valve should be installed between the liquid level gauge and the container to cut off the material during maintenance and cleaning. The installation of the main body must be vertical, with a maximum deviation angle of ≤ 3 °. When the measurement range is greater than 4m, intermediate support points should be added during installation and use.
Before the liquid level gauge enters operation, the upper flange gas phase valve should be opened first, and then the lower flange liquid phase valve should be slowly opened to allow the medium to slowly flow into the cylinder, allowing the flip column (plate) to track and indicate one by one, and adjust the zero liquid level with adjusting screws.