CJB-22 typeMagnetic Stirrer

Product Features

1. Single stirring without heatingMagnetic StirrerIt can also be used for digital temperature control mixing.

2. When using square aluminum alloy for anti-corrosion treatment, it can be done separately without heating and stirring, or placed in places such as electric heating jackets, water baths, etc. for heating and stirring.

3. Adopting the German PAPST series DC brushless motor, it has stable performance, low noise, long service life, and no spark generation.

The 4.30 ° inclined control panel is suitable for both sitting and standing perspectives.

5. Infinite speed regulation, smooth at low speeds, and strong at high speeds.

Instructions for use

1. Fix the upright pole in the screw hole on the upper back of the mixer, adjust the height of the cross clamp, fix the reaction bottle with the clamp, put in a suitable mixer, insert the power supply~220 ∨, and turn on the switch.

2. Adjust the "mixing" knob clockwise to the appropriate position for mixing.

When stirring large or viscous solutions, the knob can be adjusted appropriately to increase the stirring force. If a temperature controlled type is selected, the power supply of the heating device can be directly plugged into the socket behind the mixer to achieve temperature controlled heating.

Precautions

1. Environmental temperature: 0-50 ℃, no corrosive gas.

2. Relative humidity: 35% -85% (without condensation).

3. Do not overload for use.

4. To ensure safe use, please ensure the grounding wire.

5. Insurance pipe with a diameter of 5 × 20 5A.

When not in use for a long time, please store it in a dry and non corrosive gas place.

If there are any differences in the content of this manual due to improvements made to the product or the products mentioned in this manual, no further notice will be given