MY8600 Vibration Speed Sensor

The MY8600 vibration velocity sensor is an inertial sensor that uses the principle of magneto electric induction to convert the signal into a voltage signal, which is proportional to the vibration velocity value. Mainly used to monitor the absolute vibration of rotating machinery, such as casing vibration, bearing vibration, frame vibration, etc; Monitor the increase in vibration caused by rotor imbalance, misalignment, loose components, bearing damage, gear damage, etc. Commonly used in large rotating machinery such as steam turbines, fans, compressors, motors, pumps, gearboxes, etc.

There are three types of MY8600: ordinary type (MY8600), high temperature type (MY8600W), and explosion-proof type (MY8600EX)

Technical Specifications

1. Sensitivity: 20mv/mm/s, 28.5mv/mm/s, 30mv/mm/s, 40mv/mm/s, etc
2. Frequency response: 10-1000 Hz
3. Natural frequency: 4.5Hz
4. Measurable amplitude: ≤ 2mm (P-P)
5. High acceleration: 10g
6. Measurement direction: universal/vertical/horizontal
7. Usage environment: Temperature -40 ℃~100 ℃, relative humidity ≤ 90%
8. Dimensions: φ 30 × 70mm
9. Weight: Approximately 150g

Installation location:

Install vertically or horizontally on the tested vibration point, fix the sensor bottom bolt on the tested housing, and then tighten it.