MY6010 Active Reluctance Speed Sensor

NegotiableUpdate on 11/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The MY6010 active reluctance speed sensor adopts the Hall effect principle. When the metal teeth pass through the front end of the Hall sensor, it causes a change in the magnetic field. The Hall element detects the change in the magnetic field and converts it into an alternating electrical signal. The built-in circuit of the sensor amplifies and shapes the signal, and outputs a good rectangular pulse signal

Product Details

The MY6010 active reluctance speed sensor adopts the Hall effect principle. When the metal teeth pass through the front end of the Hall sensor, it causes a magnetic field change. The Hall element detects the magnetic field change and converts it into an alternating electrical signal. The sensor's built-in circuit amplifies and shapes the signal, outputting a good rectangular pulse signal. The measurement frequency range is wider, and it can measure 0 speed. The output signal is also more accurate and stable. It is easy to install and widely used in speed measurement of vehicles, motors, fans, and steam turbines.

MY6010有源磁阻式转速传感器

Technical Specifications:

1. Working voltage: DC5-30V

Measurement range: 0-20KHz

3. Speed measuring gear form: module 1-3 (involute gear)

4 output signal: square wave, whose peak to peak value is approximately equal to the amplitude of the working power supply voltage, independent of the speed

5. Working temperature: -30 to+120 ℃

6 thread specifications: M16 × 1 × 80mm or M12 × 1 × 80mm (can be customized)

Installation gap: 1-3mm

8 Weight: Approximately 100 grams