MP2200 multifunctional microelectronic printer

Device Showcase

mechanical system

Printing area: 148 * 210 mm Repeat positioning accuracy: ± 5 um

Temperature and humidity requirements: 15-40 ℃ (5-80% RH without condensation) Suitable altitude: 2000 meters

Environmental purification system: supports PM2.5 and volatile gas purification (under laboratory environmental conditions with PM2.5<15 and TVOC<0.1 mg/m ³, after detection with a detector, PM2.5<8 and TVOC<0.01 mg/m ³ can be achieved)

Inkjet printing module: piezoelectric inkjet printing, with 1600 nozzle holes, resolution of 600 npi/2 rows, droplet volume of 6 pL, 4-channel independent chamber, can be used independently; DPI adjustable

Glue dispensing module: It can achieve direct writing function for glue dispensing, with 14 G~34 G (aperture 60 um) standard aperture glue dispensing needles available

Scraping module: capable of achieving slit coating function, including contact/non-contact and high/low viscosity high-precision scraping modules, with a scraping width of 20/40 mm and a contact scraper gap height of 50/100 μ m

Module switching: Different process modules can achieve non disassembly switching

Printer size (length * width * height): 555 * 555 * 485 mm Printer weight: 50 kg

hardware system

Printing observation system: Integrated high-resolution industrial camera, capable of observing the printing ink condition on the surface of thin films

Heterogeneous printing positioning system: integrated with high-resolution industrial cameras, supports the positioning of the nozzle or substrate layer during heterogeneous printing, and can correct errors caused by substrate rotation

Substrate vacuum adsorption function: can provide vacuum adsorption function to ensure the flatness of the film surface

Substrate heating function: supports 90 ℃ substrate heating

Spray head moisturizing system: can provide a spray head moisturizing device to maintain the good inkjet state of the spray head

Multi channel printing: supports manual multi-channel printing

Waveform voltage setting: supports waveform percentage adjustment

Breakpoint compensation function: supports compensating for graphic loss caused by poor inkjet printing in the nozzle hole

Nozzle cleaning device: Clean the nozzle before printing to improve the inkjet effect

Ink tube heating function: supports external ink tube heating kit, supports 80 ℃ heating

I/O interface USB 3.0 interface: supports communication between upper computer and printer

Power input: 220 VAC, 50/60 Hz, 660 W

Air system: Air pressure input of 300-400 kPa (43.5-58 psi)

Pressure output: -5~300 kPa (-0.7~43.5 psi) with high-precision low-pressure system, improving the stability and reliability of low-pressure.

software system

Support input of bitmap, TIF graphic files, DXF files, and Gerber files

Support electronic device layer drawing and design

Support inkjet printing, dispensing, direct writing, and scraping functions

Support remote download and update of PC system from servers. Requirements: Windows 11 64 bit operating system, Intel N5100 CPU， Hard drive 512 GB, 16 GB memory, USB 3.0 interface

inkjet printing

Suitable ink: UV type, water-based, solvent based organic small molecule/polymer solutions, dispersed ink with metal nanoparticles, oxide nanoparticles, quantum dot functional ink and other particles (particle size<100 nm);

Suitable viscosity: 2.0-7.0 mPa · s;

Base material: Non contact printing can be performed on surfaces such as PET, PI, PEN, PDMS, glass, silicon wafers, fabrics, paper, leather, etc.

Glue Ink

Compatible inks: silver paste, carbon paste, carbon nanotube dispersion, graphene dispersion, silver nanowire and other medium to high viscosity pastes and particle dispersed inks;Suitable viscosity: tens to tens of thousands of mPa · s;

Compatible inks: organic small molecule/polymer solutions, inorganic nanoparticle dispersions, colloidal dispersions, high viscosity slurries, polymer resins, etc;

Base material: It can be printed on flexible, rigid, and stretchable substrates such as PET, PI, PEN, PDMS, glass, silicon wafers, fabrics, paper, leather, etc.

Scrape ink

Compatible inks: organic small molecule/polymer solutions, inorganic nanoparticle dispersions, colloidal dispersions, high viscosity slurries, polymer resins, etc;

Suitable viscosity: Low viscosity scraper suitable viscosity range (3-350 mPa. s), high viscosity scraper suitable viscosity range (400-5500 mPa. s)

Base material: can be coated on flexible and rigid substrates such as PET, PI, PEN, glass, and silicon wafers.