MCM40K3 manual quality comparator

MCM40K3 manual quality comparator：

Order number MCM40K3 with uncalibrated weather sensor

Order number MCM40K3 DAkS with calibrated weather sensor and DAkS certificate

Model 6

Maximum range 41 kg

Readability 1 mg

Application range 0-41 kg

Repetitive s

Under optimal conditions, 1): 2mg

Under standard conditions, 2): 3 mg

1/3 load 2)

1/10 load 2): 2 mg

Under standard conditions, F3: 6 mg

inElectronic weighing | Peeling range: 41 kg

Linear: 20 mg

Off load error: 3.5 mg/mm

Stable time: 5s

Cycle time (ABA): 120s

MCM40K3 manual quality comparator standard attachment

Data interface: RS-232C, USB, Ethernet, SD card (optional RS-232C, PS2, Bluetooth)

Other applications: weighing, unit conversion, identifier, density measurement, statistics

Hook weighing equipment: with optional accessory 69EA0040

Comes with optional accessory 69EA0040

Comes with optional accessory 69EA0040

Meteorological sensor: can be connected to an external PC

Optional attachments

Calibration weight: 20 kg | E2

YCW722-00

Meteorological module: YMC20MC

Calibrated meteorological module: YMC20MC DAkkS

Second Windproof Cover: YDS05C | YDS03C

Upgrade equipment for 10kg: YAW51

Upgrade equipment for 20kg: YAW52

Lift equipment for 50kg

Lift with a chain hoist

Grab weight pliers with handle weights

Stainless steel column installed on the ground

size

Weighing tray size (width x depth): 400x300mm

Weighing room (width x depth x height): 400x 326x126 mm

Electronic device (width x depth x height): 239x 320x56 mm

Repeatability, also known as standard deviation's'; It is calculated after 5 ABA cycles and eliminating drift

1) Optimal conditions: In the E1 quality standard laboratory, a stone made shock-absorbing workbench is used for automatic measurement without being affected by the operator, under the condition of no wind on the upper part

2) Standard condition E: In the E1 quality standard laboratory, manually measure on a stone seismic workbench with no wind on the upper part

3) Standard condition F: In a laboratory that meets at least F1 standards, manually measure on a stone shock resistant workbench with air conditioning and a gentle breeze on the upper part