Low temperature artificial climate chamber PRX-1000A double door seed germination chamber

Technical parameters of low-temperature artificial climate chamber PRX-1000A double door seed germination chamber

Main features:

1Low temperature artificial climate chamber PRX-1000A double door seed germination chamberUsing branded refrigeration compressors to ensure long-term continuous operation of the testing equipment.

2. The microcomputer program controls temperature, humidity, and light intensity, and can simulate temperature and humidity changes during the day and night. It can also choose a sufficient and stable light source for growth environment.

3. Multiple program controls can be set, with a time range of 1-99 hours for each segment, and different segmentation parameters can be set to meet different parameters of plant growth.

4. The artificial climate chamber has a power-off memory function, ensuring that the instrument can continue to operate from the breakpoint after power on.

5. Constant temperature control system, fast response, high temperature control accuracy.

6. The inner liner is made of stainless steel material, with a semi-circular transition at the four corners. The partition bracket can be freely installed and removed, making it easy to clean the inside of the box.

7. External humidification device, reliable humidification, uniform humidity.

8. Air duct ventilation, with soft air velocity and uniform temperature in the studio.

9. The independent temperature limit alarm system automatically interrupts when the temperature limit is exceeded, ensuring safe operation of the experiment and preventing accidents.

Manual for Operating Artificial Climate Chamber

1、 Power on preparation

Place the device on a ventilated, dry, and flat surface away from heat sources and electromagnetic interference, with a reserved heat dissipation space of ≥ 30cm around it. Use a well grounded 220V power supply, turn on the main switch on the back, and preheat the equipment for 5-10 minutes.

2、 Parameter settings

Press the "Set/Query" button to enter the setting mode, and adjust the temperature range from 0 ℃ to 50 ℃, humidity from 30% to 95% RH, and light intensity from 0 to 30000 Lux using the ▲/▼ buttons. A 12 hour light/12 hour dark day night cycle can be set. After setting up, press the "Set/Query" button again to confirm and exit.

3、 Sample placement

The sample should be at least 5cm away from the inner wall to avoid obstructing the air duct and sensor. Remove diseased leaves from plant samples, seal microbial culture dishes to prevent cross contamination. Close the box door and start running after the temperature and humidity stabilize.

4、 End and maintenance

After the experiment is completed, press the "stop" button to turn off the power. Wipe the inside and outside of the box with a soft cloth, and do not use corrosive cleaning agents. Long term shutdown requires emptying the water tank and running it for 5 hours every quarter to prevent moisture. Tilt angle ≤ 45 ° during transportation to avoid damaging the refrigeration system.

The above is the content generated according to your requirements. If you need to make modifications, you can continue to raise them.