Lithium iron phosphate automatic compaction density meter

UTM7305Lithium iron phosphate compaction density meterPurpose: This device provides a solution for detecting the compaction density of positive and negative electrode materials in power lithium-ion batteries, and can achieve closed-loop control such as constant rate loading, constant rate deformation, and constant rate displacement. Different process controls can be designed based on the material, with automatic loading and calculation of compaction density.

UTM7305Lithium iron phosphate compaction density meterTechnical Specifications:

Maximum test force: 10kN/300kN;

Accuracy level: 0.5 level;

Test force measurement range: 0.4% to 100% F.S (maximum load);

Test force indication error: within ± 0.5% of the indication;

Test force resolution: up to 1/500000, no grading throughout the entire process, and the resolution remains unchanged throughout the entire process;

Displacement indication error: within ± 0.5% of the indication;

Displacement resolution: 0.04um;

Deformation measurement resolution: 0.001mm; (equipped with Swiss imported dial gauge)

Stress control rate range: 0.005-5% FS/S;

Deformation rate adjustment range: 0.02-5% FS/S; (Measurable deformation of elastic materials)

Deformation control rate cabinet for error:

When the speed is 0.059% FS, it is within 1% of the set value;

When the rate is ≥ 0.05% FS, it is within ± 0.5% of the set value;

Stress control rate accuracy: within 0.5% of the set value;

Displacement control rate range: 0.001-50mm/min;

Displacement control rate accuracy: within 0.2% of the set value;

Distance between upper and lower pressing heads: 240mm;

Clear distance between two columns: 300mm;

Upper pressure plate diameter: 150mm;

Lower pressure plate diameter: 150mm;

Maximum travel of the lower pressure plate: 100mm;

Working power supply: 380VAC/50Hz ± 10%;

Power: 1.5KW.