-
E-mail
suas@suastest.com
-
Phone
13302210258
-
Address
1st Floor, Factory Building, No. 47 Yangtaishan Road, Guantian Community, Shiyan Street, Bao'an District, Shenzhen
Product Categories
- Universal tensile testing machine
- Hydrogel tensile testing machine
- Battery Ear Peeling Tester
- Diaphragm puncture testing machine
- Universal testing machine for high and low temperature materials
- Hot deformation Vicat softening point testing machine
- Pendulum impact testing machine
- Plastic tensile machine
- Powder compaction density meter
Shenzhen Shengsi Yiwei Technology Co., Ltd. (formerly Shenzhen Sansi Testing Machine Co., Ltd.)
Hydrogel universal tensile testing machine
NegotiableUpdate on 01/30
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Shenzhen Shengsiyiwei Hydrogel Universal Tensile Tester is an instrument specially used to test the mechanical properties of hydrogel materials. It can test the stress-strain curve, elastic modulus, breaking strength and other parameters of hydrogel under different tensile speeds, tensile strains, cyclic tensile, tensile temperatures and other conditions.
Product Details
The universal tensile testing machine for hydrogel is an instrument specially used to test the mechanical properties of hydrogel materials. It can test the stress-strain curve, elastic modulus, breaking strength and other parameters of hydrogel under different tensile speeds, tensile strains, cyclic tensile, tensile temperatures and other conditions.
Electronic universal tensile testing machine, hydrogel universal tensile testing machine basicparameter：
1. Maximum test force:50N；
2. Accuracy level of testing machine: 0.5 level;
3. Test force measurement range: 0.4% -100% FS, no grading throughout the entire process;
4. Relative error of test force indication: ± 0.5 of indication%Within;
5. Test power resolution: maximum test power1/500000(The resolution remains unchanged throughout the entire process);
6. Deformation measurement range: 0.2% -100% FS;
7. Relative error of deformation indication: ± 0.5 of indication%Within;
8. Deformation resolution: maximum deformation amount1/±500000；
9. Relative error of displacement indication: ± 0.5 of indication%Within;
10. Displacement resolution: 0.04 µm；
11. Range of force control rate adjustment:0.005-5%FS/S；
12. Relative error of force control rate: ± 0.5 of the set value%Within;
13. Deformation rate adjustment range: 0.02—5%FS/S；
14. Relative error of deformation control rate: When the rate is less than 0.05% FS, it is ± 1 of the set value%Within; rate≥0.At 0.5% FS, it is within ± of the set value0.5%Within;
15. Range of speed adjustment for crossbeam:0.001—500mm/min；
16. Relative error of beam velocity: velocity<0.0± 1.0 of the set value at 1mm/min%Within; rate≥0.01mm/minWhen setting the value±0.5%Within;
17. Constant force, constant deformation, constant displacement control range:0.5%--100%FS；
18. Constant force, constant deformation, constant displacement control accuracy: set value<10%FSWhen, for the set value±1%Within; set value≥10%FSWhen, for the set value±0.5%Within;
