-
E-mail
suas@suastest.com
-
Phone
13302210258
-
Address
1st Floor, Factory Building, No. 47 Yangtaishan Road, Guantian Community, Shiyan Street, Bao'an District, Shenzhen
Product Categories
- Universal tensile testing machine
- Hydrogel tensile testing machine
- Battery Ear Peeling Tester
- Diaphragm puncture testing machine
- Universal testing machine for high and low temperature materials
- Hot deformation Vicat softening point testing machine
- Pendulum impact testing machine
- Plastic tensile machine
- Powder compaction density meter
Shenzhen Shengsi Yiwei Technology Co., Ltd. (formerly Shenzhen Sansi Testing Machine Co., Ltd.)
Battery Ear Peeling Tester
NegotiableUpdate on 01/30
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The battery ear peeling test machine is used for testing and analyzing the mechanical properties of anode and cathode materials, such as tension and peeling. It has three closed-loop control methods: stress, strain, and displacement, and can calculate parameters such as maximum force, tensile strength, elastic modulus, and fracture elongation.
Product Details
Battery Ear Peeling TesterPurpose:
Used for testing and analyzing the mechanical properties of cathode and anode materials, including tension, peeling, etc. It has three closed-loop control methods of stress, strain, and displacement, and can calculate parameters such as maximum force, tensile strength, elastic modulus, and fracture elongation.
Battery Ear Peeling TesterTechnical Specifications:
1. Accuracy level of testing machine: 0.5 level;
2. Test force measurement range: 0.4% -100% FS, no grading throughout the entire process;
3. Relative error of test force indication: within ± 0.5% of the indication;
4. Experimental resolution: 1/500000 of the maximum experimental force (with constant resolution throughout the entire process);
5. Deformation measurement range: 0.2% -100% FS;
6. Relative error of deformation indication: within ± 0.5% of the indication;
7. Deformation resolution: 1/± 500000 of the maximum deformation amount;
8. Relative error of displacement indication: within ± 0.5% of the indication;
9. Displacement resolution: 0.04 µ m;
10. Range of force control rate adjustment: 0.005-5% FS/S;
11. Relative error of force control rate: within ± 0.5% of the set value;
12. Deformation rate adjustment range: 0.02-5% FS/S;
13. Relative error of deformation control rate: within ± 0.5% of the set value;
14. Beam speed adjustment range: 0.001-500mm/min;
15. Relative error of crossbeam speed: within ± 0.5% of the set value.
