Liquid chromatography UV detection linear range standard solution

Model:JJG 705-2014- Customization

NameLiquid chromatography UV detection linear range standard solution

Packaging: 5ml * 10 pieces

Purpose:Linear range of UV detection in liquid chromatography

Liquid chromatography UV detection linear range standard solutionSpecific steps (instructions for use):

Connect the detector to the data processing system, set the wavelength of the detector to 254nm, and after stabilizing the power supply, use a syringe to directly inject 2% YBC aqueous solution into the detection cell and rinse it until the reading stabilizes. Record this value. Then, according to the above method, inject BT-2% YBC series aqueous solutions (BT content of 0.1%, 0.2%,...) into the detection cell in sequence ..., 1.0%), and record the stable response signal values corresponding to each solution. Repeat the measurement three times for each solution and take the arithmetic mean. Using 5 BT solution concentrations (0.1%, 0.2%, 0.3%, 0.4%, 0.5%) and corresponding response signal values as standard curves, find the readings of acetone solution concentrations greater than 0.5% at each point on the curve, compare them with the corresponding measured values at each concentration point, and determine the concentration with a difference of 5% as the detection upper limit CH. The minimum detection concentration obtained according to c) in 6.2.2.4 is the detection lower limit CL value, and the CnH/CL ratio is the linear range.

JJG 705-2014 liquid chromatography UV detection linear range requires the following standard solutions:

Liquid chromatography UV detection linear range standard solutionPlease contact customer service.

More standard solutions are availableZhongyuan Standard Material Center (Henan Detong Environmental Protection Technology Co., Ltd.)Welcome to inquire!