Large walk-in constant temperature and humidity test room Guangdong

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The large walk-in constant temperature and humidity test room in Guangdong is suitable for conducting adaptability tests in high and low temperature, humidity environments in electronic and electrical engineering, household appliances, automobiles, instruments and meters, electronic chemical engineering, components, raw materials, coatings, and plating layers.

Product Details

Large walk-in constant temperature and humidity test room GuangdongPerformance parameters:

Temperature range A: 0 ℃~100 ℃, B: -20 ℃~-100 ℃, C: -40 ℃~100 ℃, D: -60 ℃~100 ℃

Temperature fluctuation ≤&plsmn; 0.5 ℃ humidity fluctuation ≤&plsmn; 2%RH

Temperature uniformity ≤&plsmn; 1 ℃ humidity uniformity ≤&plsmn; 1.5%RH

Temperature deviation ≤&plsmn; 2 ℃ humidity deviation ≤&plsmn; 3%RH

Heating rate 3 ℃~5 ℃/min Cooling rate 1 ℃~1.5 ℃/min

Working voltage AC380V

Controller: Imported programmable touch LCD with Chinese English dialogue display Microcomputer integrated controller;

Accuracy range: Set accuracy: temperature 0.1 ℃, indication accuracy: temperature 0.1 ℃;

Sensor: Platinum resistor PT100Ω/MV;

Heating system: fully independent system, nickel chromium alloy electric heating heater;

Refrigeration system: Original from France&ldqo; Taikang&rdqo; Fully enclosed air-cooled compressor refrigeration method;

Circulating system: Temperature resistant and low-noise air conditioning motor Multi blade centrifugal wind turbine;

Outer box material: Temperature resistant variable temperature insulation board

Inner box material: temperature resistant insulation board;

Insulation material: polyurethane rigid foam/ultra-fine glass fiber cotton;

Door frame insulation: double-layer high and low temperature aging resistant silicone rubber door sealing strip;

Safety protection: leakage, short circuit, overheating, motor overheating, compressor overpressure, overload, overcurrent protection/controller power-off memory;

Environmental temperature: 5 ℃~+30 ℃ ≤ 85% R.H;

Large walk-in constant temperature and humidity test room GuangdongProduct packaging list:

1. Equipment: One machine with various accessories; (Standard configuration)

① Overtemperature protector: LED digital microcomputer controller to prevent the test sample from being damaged due to high or low temperature;

② Fuse: one set of spare fuses;

③ Instruction manual: 1. Controller instruction manual 1 One operating manual 3. Product qualification certificate;

2. Attached files:

Delivery note, commissioning report, acceptance checklist, quality warranty card, maintenance record card.

Dongguan automotive parts walk-in constant temperature and humidity test chamber meets the standards:

1. Manufacturing standards: GB/T10586-2006, GB/T10592-1989

2. Verification standards: GB/T5170.2-1996, GB/T5170.5-1996

3. Meet the test standards: