Large scale horizontal pressure sintering furnace

NegotiableUpdate on 01/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Equipment usage: Pressure sintering molding of silicon nitride ceramic substrates. Equipment features: (1) Horizontal structure, composed of furnace body, heating, vacuum, atmosphere control system, etc; (2) The furnace shell material is made of 16MnR pressure vessel steel; (3) The heating element is made of isostatic pressed graphite, and the insulation layer is made of graphite felt, carbon carbon deep deposition fiber composite material, etc; (4) Equipped with a fast air cooler, the cooling speed is short and the work efficiency is high Main applicable standards for $r $n: Pressure vessels: GB/T 150.1-150.4-2024; Vacuum Technology - Vacuum Sintering Furnace JB/T 10550-2006;

Product Details

Mainly used for the preparation of high-performance materials such as metal ceramic materials, chemically high-purity single crystal materials, nano phase materials, gradient functional materials, etc. under high temperature and high pressure conditions. This equipment also has a degreasing function and is equipped with a tail gas incineration device

After vacuuming, inert gas can be filled under high pressure, and the principle of graphite resistance heating radiation is used to conduct heat radiation to the workpiece (crucible), completing the sintering function under high temperature and high pressure

Main applicable standards:

Pressure vessel:GB/T 150.1~150.4-2024；vacuum technology—vacuum sintering furnaceJB/T 10550-2006；Mechanical properties of fasteners: stainless steel bolts, screws, and studsGB/T 3098.6-2014；Basic conditions for electric heating devicesGB/T10067.4-2005

Main parameter introduction:

The furnace body is a double-layer structure, with water flowing in the middle and installed horizontally. The front door is open for easy material loading and unloading, and the furnace door and body are closed using a gear ring method;

Design maximum temperature2000℃, maximum operating temperature1900℃； Heating rate approximately1200Below ℃10℃/min，1200Above ℃5-8℃/min;

Inflation pressure 9.9Mpawork pressure:9.0Mpa;

Control software toPLC+Touch screen as the core, automated control, Chinese interface;

The size of the effective loading area is（length, width, height）：400×250×250mm/500×400×400mm/1250×500×500mm/475×375×375mm；

Non standard customization is acceptable as needed.