High vacuum tungsten wire sintering furnace

NegotiableUpdate on 01/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Equipment usage: The $r $n small vacuum tungsten wire sintering furnace is a periodic operation type, using tungsten mesh as the heating element, suitable for high-temperature sintering treatment of difficult to accommodate metal materials such as tungsten, tantalum, molybdenum, or inorganic non-metallic materials. Equipment composition: The sintering system mainly consists of the following parts: vacuum chamber, heating and insulation system, control system, vacuum system, water circulation distribution system, safety alarm system, etc

Product Details

High vacuum tungsten wire sintering furnaceHighly integrated quick connect electrical connections facilitate equipment relocation. After passing the factory inspection, all pipelines and cables have been connected, and only need to be aligned and plugged in during debugging. Therefore, installation is convenient and the debugging cycle is short, with one debugging error. Standard made electrical control cabinets are safer to use and easier to operate; Omron or Schneider branded electrical components have reliable quality and stable control; The system has a classification sound and light alarm function, which is easy to determine the cause of the fault. The inner surfaces of the furnace shell, furnace cover, etc. have been precision polished, with a smoothness better than Δ 6. Using a helium mass spectrometer vacuum leak detector for pressure rise rate index testing, rapid detection, and reliable data. This electric furnace is a vertical structure, with an integrated control cabinet and furnace body, equipped with moving wheels, occupying a small area for easy movement, and consuming less water. Electric furnace bottom lifting (with manual function retained) ensures smoother operation and high reliability.

Main technical parameters of high vacuum tungsten wire sintering furnace

Temperature: 2200 ℃;

The dimensions of the vertical workspace are: Ø 60 × 80mm in height, Ø 160 × 160mm, Ø 200 × 200mm, etc;

The dimensions of the bottom lift workspace are: Ø 300 × 400mm in height, Ø 400 × 500mm, etc

The dimensions of the horizontal workspace are (length, width, height): 300 × 300 × 300mm/300 × 300 × 400mm/600 × 400 × 400mm/800 × 500 × 500mm, etc

Cold state ultimate vacuum degree: 10^-3Or 10^-4Pa；

Power supply: three-phase 380 V 50 Hz;

Uniformity of furnace temperature: ± 5 ℃ (under vacuum);

Automatic gas protection: argon, nitrogen, hydrogen; Control mode: centered around LCD touch screen and PLC

According to user needs, non-standard customization of other sizes is possible.