Large capacity magnetic electric heating sleeve mixer

Clzn-tsLarge capacity magnetic electric heating sleeve mixerMain technical parameters:

• Large capacity, high magnetic stirring electric heating jacket;
  Electric heating sleeve with hemispherical heating, fast heating and high temperature;
  Comes with a standing pole for easy container fixation
  Heating and stirring dual switch, can be operated separately;
  Capacity: 5000ml (5L), 10000ml (10L), 20000ml (20L), 30L, 50L
  Temperature control range: Room temperature -380 ℃ (400 ℃, 500 ℃, 600 ℃ optional)
  Temperature control accuracy: ± 1 ℃, Pt100 temperature measurement
  Internal and external sensors can alternately measure and control the temperature of the solution
  Speed range: 50-2500 revolutions per minute

Clzn-tslarge capacityInstructions for using the magnetic electric heating sleeve mixer:

1. Fix the upright pole in the screw hole above and behind the mixer, adjust the height of the cross clamp, use a universal clamp to fix the reaction bottle, put in a suitable mixer, insert the power supply~220 ∨, and turn on the switch.

2. Adjust the "mixing" knob clockwise and adjust it to the appropriate position according to the speed display for mixing.

When stirring large or viscous solutions, the knob can be adjusted appropriately to increase the stirring force.

4. Temperature setting: Press and hold the "▲" or "▼" keys to quickly set the desired heating temperature, such as 100 ℃. When the green light is on, it indicates heating, and when the green light is off, it indicates stopping. The microcomputer will determine the heating amount based on the temperature difference between the set temperature and the current temperature, ensuring that there is no temperature shock and that the heating is done in one go. The heating process will be easily completed by maintaining a balance between the set value and the displayed value with a temperature difference of ± 1 ℃.

5. Self setting function. Activating the self setting function can shorten the heating time, reduce the flushing temperature, and achieve good balance when there is no regularity between different heating stages or heating power and the amount of solution. However, after changing the heating medium or heating conditions, the self setting should be reset.

6. Start self-tuning: Press and hold the shift key "◄" for 5 seconds, and the setting window number will flash to enter the self-tuning state. After three temperature pulses, the number will stop flashing, indicating the end of self-tuning and can be used. However, self-tuning needs to be used during initial heating, and the self-tuning performed midway may not be accurate.

7. There is a rubber plug below the mixer to protect the external thermocouple socket from corrosion, rust, and to conduct the internal wires. If unplugged, the internal probe will disconnect and the machine will stop working. If using an external thermocouple, the plug should be removed and stored. The external thermocouple plug should be inserted into the socket and the nut should be locked. Then, the stainless steel probe should be placed in the solution for temperature control and heating.

8. The appliance is equipped with a break protection function. When the thermocouple connection is poor, the display window will show "1" or "hhhh" green light on the hundred position display, and the appliance will stop heating. It needs to be checked before use.