Large capacity centrifuge

Large capacity centrifugeSeparation technology is a new technology developed based on the state of particles in a practical centrifugal environment. Particles of different densities, sizes, or shapes settle in centrifugal environments at different speeds, resulting in a roughly spherical heterogeneous mixture that can be separated by centrifugation. Centrifuges are used for further research on biochemistry and separation of large amounts of substances. For example, collecting cells, separating plasma, and isolating from these pre purified preparationsDNAAnd protein molecules can be used to isolate viruses, as well as large-scale Escherichia coli, tight cell components, nuclear protein particles, etc.

Large capacity centrifugeTechnical Specifications:

1Power supply: AC220V 50HZ

IIWhole machine power:600W

IIIturn Speed:4000turn/divide

4Capacity: 4 * 250ml

Usage:

Firstly, add the substances to be separated into the centrifuge tubes provided by this machine and insert them into the centrifuge head holes. (However, the amount of substance added to each centrifuge tube must be basically equal.) Close the cover plate, turn on the power, turn on the power switch, the power indicator light will turn on, and then select the "timing" device to the centrifugal working time you need or to the normally open position (counterclockwise to the end point). At this time, the centrifuge enters the working state, and the speed is set to centrifugal speed selection, with a working state of about 500-4000 revolutions per minute. You can choose the appropriate location according to your actual needs.

Notes:

1 It is strictly prohibited for any liquids or other debris to enter the centrifugal chamber, otherwise it may damage the main unit.

2 The instrument casing should be properly grounded to prevent accidents caused by moisture damage to the entire machine.

3 When the centrifuge head is running at high speed, please do not open the upper cover casually.

4 Do not start directly at high speed, it must be started slowly from low speed to high speed!

Repair and Accessories:

If you find any eccentricity when using this machine, please have experienced staff check and repair it. First, open the bottom cover and check if the three pillars of the motor are misaligned. Adjust them accordingly. If there are any other issues, please notify our factory for repair.

(Large capacity centrifuge)