HH-4 single row four hole water bath pot

　　HH-4 single row four hole water bath potstructure

The HH-4 single row four hole water bath pot is a sink type, with both the sink and cover made of stainless steel, and the chassis carefully crafted from high-quality cold-rolled steel plate. The temperature control part uses specially designed electronic temperature control; By displaying the actual temperature inside the pot through digital display, this series of products has the characteristics of beautiful appearance, corrosion resistance, stable temperature control, energy saving and practicality, easy maintenance, and long life.

Usage and precautions;

1. Safe use of electricity: This product uses a 220V AC power supply, and the power socket should use a three hole safety socket. It must be properly grounded and the ground wire must not be connected to the gas pipe.

2. Before powering on, water should be injected into the pot above the partition. During use, the heating tube must not be exposed to the water surface, otherwise the heating tube will burn or even burst, or the solder will melt and leak, causing electric shock, etc.

3. Connect the power and set the temperature: Press the SET button to set or view the temperature setpoint. Press the SET key and the digital display character will start flashing, indicating that the instrument has entered the set state. Press the △ key to increase the set value, press the ▽ key to decrease the set value. Long press the △ key or ▽ key to quickly change the data. Press the SET key again to return the instrument to normal working state and complete the temperature setting. If the temperature controller is intelligent, a separate temperature control manual should be attached

Main technical parameters

(HH-4 single row four hole water bath)