Laboratory infusion pump

NegotiableUpdate on 05/13

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The Fusion 100-X infusion pump is a programmable modular dual channel precision infusion pump. This injection pump has the following features: two syringes for simultaneous injection, a fully glass chemical resistant touch screen, a programmable multi-step mode, computer control with laboratory view and other programs, and an additional 11 syringe push frame to increase the number of syringes used to 11. Fusion 100-X can be used for distribution/dilution, organ/tissue perfusion, and fluid circulation in chemical, pharmaceutical, and biotechnology research and development.

Product Details

1： Product Introduction

Secondly:Laboratory infusion pumpcharacteristic

Syringe from 0.5 microliters to 60 milliliters

Modular injection/extraction and optional 10 syringe holders available

The rate ranges from 0.0001 microliters per minute to 102 milliliters per minute

Controlled through touch screen, USB, RS232, TTL

Free LabVIEW and Matlab drivers

Three:Laboratory infusion pumpparameter

Accracy	<0.35%
repetitiveness	<0.05%
Syringe range	0.5µl to 60ml
Low flow velocity	0.001µl/min
High flow velocity	102ml/min
Linear thrust	35Ib
display screen	4.3-inch LCD touch screen
connection method	USB,RS232 and TTL ports
power supply	110/220VAC
Operating temperature	4℃ to 40℃
storage temperature	-10℃ to 70℃
humidity range	20% to 80%RH