- Phone
-
Address
2320 Mingzhu Yihe Business Port, No. 88 Jingyi Road, Shizhong District, Jinan City
Product Categories
Jinan Youtian Machinery Equipment Co., Ltd
LAND-M2, 300-1100° C (eyepiece type) pyrometer
NegotiableUpdate on 05/18
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
LAND-M2, 300-1100 #176; C (eyepiece type) pyrometer $r $nFLOWSERVE F5-MEC-420 $r $nSCHAEVITZTR9420A angular displacement sensor$ r$n Schneidertelemecanique xulm06031$r$n ZFGE5060F47/141 $r$nMTS EHM0150MD341A01 position sensor
Product Details
LAND-M2, 300-1100 ° C (eyepiece type) pyrometer
LAND-M2, 300-1100 ° C (eyepiece type) pyrometer
KUBLER8.9080.4231.3001
KPMAQUA-PICCOLO Moisture Tester
ZFGE5 060 F47/153 upgraded to ZF 4161 109 201
KACOQHLP40-50AGU01sealing ring
FLOWSERVE PMVF5-MEC-420
galtech1SP A2.5D 10GG4
REICH submersible pump12V D.C 18l/min 0.9bar
MP Spa FiltersE7 11OP025009
Saia-BurgessTYPE：V9N 10A250VAC
Ganter GriffGN117_SG_T2_Z260 * 31 Door Pin System
THOMASCENTRI 776 SEK
ELOBAU671271NU0
The optical pyrometer is a hidden wire optical pyrometer.
There are two measurement methods: one is to adjust the resistanceRTo change the brightness of the filament, when it is equal to the brightness of the measured light source image, the filament disappears from the light source image, and the brightness and temperature of the object are read from the electric meter G; Alternatively, the precise value of current can be measured by a potentiometer using compensation method, and then the brightness temperature can be calculated. The latter method is suitable for precise temperature measurement.
The second is to maintain the brightness of the filament at a constant value and rotate an absorbing glass with a thickness that changes with the angle. When the brightness of the object image is the same as the brightness of the filament, the brightness temperature value of the object can be read from the corner of the absorbing glass.
The temperature indication value on the optical pyrometer can be determined using a standard temperature lamp. The standard temperature lamp, as shown in Figure 1b, can reproduce brightness temperatures within the range of 900-2500 ℃ and can also be used as a light source.
The temperature range of 700-3000 ℃ can be measured using a hidden wire optical pyrometer. Replacing the light bulb and the absorbing glass attached to the objective lens can also measure higher temperatures.
