Keysignt is a German PNA network analyzer based in Shenzhen, Guangdong Province

Keysignt is a German PNA network analyzer based in Shenzhen, Guangdong Provinceintroduction

N5247B is a model in the Keysight PNA-X series,

1. Network analysis performance
·Dynamic range:>123 dB (typical value, at 10 MHz)
·Output power:
·Standard source power:+13 dBm
·High power option (optional):+20 dBm or+26 dBm (within a specific frequency range)
·Trace noise:<0.005 dB RMS (at 10 Hz IF bandwidth, 43.5 GHz)
·Measurement speed:<7 milliseconds/point (fully dual port calibration, 201 points)
·System impedance: 50 ohms or 75 ohms (optional)

2. Receiver/analyzer performance

·Structure: Integrate 4 independent test receivers (for full dual port error correction) and 2 independent reference receivers.
·Original dynamic range:>119 dB (at 43.5 GHz)
·Sensitivity:<-112 dBm (for noise figure measurement)

3. Options and Enhanced Features (This is the core advantage of PNA-X)
·Pulse measurement: Built in pulse modulator and pulse generator, supporting wide/narrow pulse and high duty cycle measurement.
·Noise factor measurement: Integrated noise factor analyzer (NFA) function, supporting cold source method and Y factor method, can measure gain, noise factor, Y factor, etc.
·Gain compression measurement: Integrated distortion application software, can automatically measure X and S parameters under power scanning, generate 1dB compression point, saturation power, AM-PM conversion and other data.
·Variable frequency device measurement: (such as mixers, up and down converters) supports scalar and vector mixer measurement, built-in local oscillator source, can measure conversion loss, isolation, group delay, etc.
·Measurement of second-order and third-order intermodulation distortion (TOI/SOI): Two tones are synthesized internally and the fundamental and harmonic powers are directly measured using a receiver to calculate TOI/SOI.

4.N5247BSignal source performance

·Source harmonic:<-55 dBc (typical value)
·Source non harmonic:<-70 dBc (typical value)
·Source power flatness: ± 1.5 dB (typical value, full frequency band)

5. Keysignt is a German PNA network analyzer based in Shenzhen, Guangdong Provincehardware configuration

·Test ports: The standard configuration is 4 ports (2x2), which can be expanded to up to 24 ports through a multi port adapter (such as N5290A).
·Front panel connector: 3.5 mm (female), supports DC to 43.5 GHz.
·Internal second signal source: The standard configuration includes a second internal synthesis source for mixer measurement or dual tone excitation.