KRACHT indicator AS8-U-230-F in stock

KRACHT indicator AS8-U-230-FIt is a multi-purpose on-site display mainly used for flow measurement and control. It can be directly inserted between the connector and socket of the flowmeter, and is suitable for all flowmeter product series from KRACHT company with DIN43650 standard connector interfaces. Its power supply voltage is 230V AC, 50/60Hz.

KRACHT indicator AS8-U-230-FFeatures

Signal processing and display: The microcontroller processes the incremental input signals of KRACHT flow meters and other measurement sensors, filters and converts the signals, and converts them into physical quantities of flow rate or volume. The flow rate or volume can be selected for display on the screen.

Multiple output interfaces: equipped with two programmable relays, one analog output terminal, or one serial interface RS 232 for external reprocessing.

Convenient setting: The standard AS8-U-230 can be set by removing the three buttons on the panel, while the F specification can be set through a membrane keyboard. The conversion of display units can be achieved through the Dip dip switch at the back of the panel.

Direct connection to flow meter: The flow meter can be directly connected through an integrated 24VDC sensor power supply, simplifying system connection.

KRACHT indicator AS8-U-230-FTechnical Specifications

Input impedance: ≥ 7500Ohm.

Input amplitude: Low ≤ 9V, High ≥ 12V.

Maximum input frequency: 1Hz-2500Hz.

Accumulated counter measurement range: 2x10 ⁹ pulses.

Input voltage: maximum ± 30V.

Working temperature: 0 ℃ -60 ℃.

Storage temperature: -25 ℃ -85 ℃.

KRACHT indicator AS8-U-230-FApplication areas: Suitable for hydraulic testing benches, measuring equipment, printing machines, painting equipment, etc. It can measure various media such as engine oil, gear oil, offset printing ink, solvents, etc.