Jinshang Bernard torque 600Nm multi turn valve electric device

Jinshang Bernard torque 600Nm multi turn valve electric device

With numerous experienced engineers and a sales agent and branch network spread across various regions, our company has the ability to provide users with a solution that meets the needs of different places. In order to achieve this service tenet, Tianjin Bernard Automation Equipment Co., Ltd. has established the following product development philosophy after years of exploration: we always meet the needs of our customers, design stable, reliable, and high-precision product selection transmission mechanisms to achieve high mechanical efficiency. Develop and design intelligent electric actuators to provide users with non-invasive, easy-to-use, and multifunctional actuators. Tianjin Bernard Automatic Control Equipment Co., Ltd. is a professional manufacturer of electric actuators, characterized by fast updates, high reliability, stable performance, easy installation, debugging, and maintenance. The combination structure of variable torque actuator is the design concept of our company. The module components have high interchangeability and diverse signal formats.

Jinshang Bernard torque 600Nm multi turn valve electric device

Widely used in various industries, including electricity, steel, refining, natural gas, water treatment, gas and heat, shipbuilding, automotive industry, aluminum processing, chemical industry, etc. Welcome friends from all walks of life at home and abroad to visit the factory, discuss cooperation, and establish technical and economic cooperation relationships. Adjustment of travel control mechanism: (1) Close the valve tightly manually. (2) To disengage the travel control mechanism, use a screwdriver to push the top rod in the travel control mechanism and rotate it 90 degrees to disengage the driving small gear from the counter position gear set. (3) Rotate the "close" adjustment shaft with a screwdriver in the direction of the arrow until the cam presses down on the spring pressure plate to activate the micro switch, then the close stroke is initially adjusted. (4) Release the lever to ensure that the driving gear is correctly engaged with the two side gears. To ensure correct engagement, after loosening the top rod, the adjustment shaft must be slightly rotated left and right with a screwdriver. At this time, it can be electrically opened a few times and then closed. Depending on whether the close stroke meets the requirements, if it does not meet the requirements, it can be readjusted according to the above procedure. (5) Adjust the open direction; after adjusting the close direction, manually open the valve to the desired position (note: the stroke control mechanism cannot be disconnected at this time, otherwise the close stroke adjustment will be disrupted) Then disconnect the stroke control mechanism, rotate the "open" adjustment shaft, and rotate in the direction of the arrow until the cam presses the spring pressure plate to activate the micro switch. Then mesh the stroke mechanism with the driving gear to complete the adjustment of the open stroke. After adjusting the stroke control mechanism, it can be operated repeatedly several times. Generally, the valve opening control is around 90%. Adjustment of the torque control mechanism: (1) First adjust the closing torque. (2) Starting from the small torque value, gradually increase the torque value until the valve is tightly closed. (3) Adjust the direction torque of the switch according to the working characteristics of the valve. Generally, the opening direction torque is greater than the closing direction torque. Attention should be paid to whether it can be tightly closed. If it cannot be tightly closed, increase the torque value appropriately to ensure that it can be tightly closed and opened.