Jiangxi Agilent E4447A Spectrum Analyzer 43G Sales and Lease

Jiangxi Agilent E4447A Spectrum Analyzer 43G Sales and Lease
Jiangxi Agilent E4447A Spectrum Analyzer 43G Sales and Lease

Agilent E4447A Spectrum Analyzer

Brand: Agilent
performance
*+/-0.24dB * for amplitude accuracy
*-Average noise level displayed at 155dBm/Hz (DNAL)
*Phase noise at 10kHz bias: -118 dBc/Hz
*81 dB W-CDMAACLR dynamic range
Analyze bandwidth
*40 or 80 MHz analysis bandwidth supports capturing and measuring complex signals. see:
*-78dB (rated value) third-order intermodulation
*0.5 dBIF frequency response
*-78dB (rated value) third-order intermodulation
Ling*
*Flexible platform with 16 optional and easy-to-use built-in measurement * software PSA measurement * software
*The power kit can perform one click power measurement for more than 20 wireless standards. PSA power kit enables one click power measurement
description
The E4440 series measures complex RF and microwave signals within its measurement range.
E4443A 3Hz-6.7GHz
E4445A 3Hz-13.2GHz
E4440A 3Hz-26.5GHz
E4447A 3Hz-42.98GHz
E4446A 3Hz-44GHz
E4448A 3Hz-50GHz

*HSDPA/HUPA measurement * piece
*Built in receiver * piece
View PSA High Bandwidth Digital Converter Video Demo
Understand single key power measurement
Understand the information of 40/80 MHz bandwidth digital converter
Learn more about PSA calibration software

Main features:
dynamic range
*-166dBm Display Average Noise Level (DANL)
*+17dBm third-order intermodulation (TOI) (+19 dBm typical)
*-116dBc/Hz phase noise (10 kHz bias) (-118dBc/Hz typical)
*Degree
*± 0.62 dB * for amplitude accuracy (± 0.24 dB typical)
*± 0.38 dB frequency response (± 0.11 dB typical)
*± 0.07 dB logarithmic amplification linearity
Speed:
*Fast low-level parasitic search
*<30ms fast ACP measurement
*50 measurement/second local update rate, 45 measurement/second remote measurement
Standard features:
For more features and information, please refer to the PSA series manual
*Fully digital IF with automatic range function
*Phase noise optimization
*Complete detector kit
*160 resolution bandwidth settings (10% step)
*2dB step attenuator
*FFT and sweep frequency measurement mode
*Gate selection scanning frequency
*Complete set of single key power measurement
*Use built-in CISPR and MIL standard pre compatible EMI detectors and bandwidth for EMI measurement
Optional features:
*40MHz or 80MHz bandwidth digital converter
*Built in preamplifier (option 1DS: 100 kHz -3 GHz; Option 110: 10 MHz -6.7 GHz)
*Easy to use built-in PSA series measurement * key
*Modulation analysis and linking to 89601A vector signal analysis software