Jiangsu rewinder fixed stroboscope PT-L02B-1000

A stroboscope, also known as a strobe still or tachometer, strobe light, etc., can emit brief and frequent flashes of light. Adjust the flashing frequency of the stroboscope so that it is close to (or synchronized with) the rotational (or motion) speed of the object being tested. Although the object is moving at high speed, it appears to be moving slowly or relatively stationary. By utilizing this visual persistence phenomenon, the human eye can easily observe the surface quality and operating conditions of the high-speed moving object, and the flashing frequency of the stroboscope is the rotational speed or motion frequency of the object being tested (such as a motor). It is also possible to use a stroboscope to analyze object vibration, observe the movements of high-speed moving objects, and take high-speed photographs. As shown in the figure below.

Figure 1 Visual observation Figure 2: Using a strobe light

The duration of the flash of the strobe and the relative brightness of the light will affect the clarity of the image.

The longer the duration of the flash, the more blurry the image.

It is recommended that the flash brightness of the stroboscope be about 4 times the brightness of the surrounding environment.

Fixed LED Strobe PT-L02BIt is a new energy product developed by our company, using high-power LED beads from the United States. It has a wide measurement range, high brightness, and uniform and soft lighting. The bead has a long lifespan, low power consumption, and is equipped with an efficient exhaust and heat dissipation system. The heat generation is almost zero, and the product needs to be fixed and installed on the equipment for use.

Product Features JiangsuFixed strobe light meter PT-L02B-1000 for rewinding machine

1.adoptImported LED from the United StatesLamp tube,The service life of LED is 3-5 years；

2.Radiation width greater than 30cmThe length of the instrument is X, and the light spot is uniform and soft.

3.The flicker brightness and flicker pulse width can be adjusted freely within a certain range；

4.The frequency units Hz and f/m are selectable, suitable for different usage habits;

5.Automatic stop flash protection function, saving electricity and improving the service life of strobe lights;

6.Compatible with various external triggering sensors such as photoelectric eyes, proximity switches, encoders, etc.

7.The software has two tracking programs that can automatically track printed surfaces without fixed color codes；

8.In external trigger 1 mode, the software has a phase angle adjustment function;

9.Can be connected to a communication cable for remote control.

Technical parameters: JiangsuFixed strobe light meter PT-L02B-1000 for rewinding machine

1.Working power supply: AC100V～240V 50～60Hz

2.Frequency display: 6-digit digital display

3.operation mode: Internal trigger and external trigger

4.Trigger frequency range: 50.0 times/minute to 24000 timestimesAdjustment accuracy 0.1 times/minute (can be customized according to customer requirements)

1.00Hz～400.0Hz, Adjustment accuracy 0.01Hz

5.External trigger phase shift function: 0-359 °, accuracy 1 °

6.Single working time:Set arbitrarily by function keys (unit: s)

7.External trigger sensor:Photoelectric sensors or Hall switches can also be provided with signals by the PLC controller on the device

8.Sensor power supply: DC12V 100mA， Provided internally by the strobe light

9.External trigger signal level: Low level 0~0.7V, high level>2.7V (upper limit allows 24V), rising edge trigger, high level duration>20us

10.Strobe pulse width: 8~100us

11.Strobe brightness: Adjustable within a certain range

12.Remote control: Hand operated box（optional）

13.Product series and external dimensions:

PTThe series of portable strobe detection lamps are suitable for on-site sampling at various locations during the production process. This series of products comes with power cords or built-in rechargeable batteries with powerful capabilities, without slowing down or stopping the production line. While maintaining normal operating speed, any minor processing defects will be exposed under different brightness strobe detection lights There are also fan type strobe lights and PT models suitable for long-term continuous operation on the inspection machine-L200AhandheldStrobe.

PTThe series of fixed strobe lights are suitable for production processes with wide widths or positions that require fixed strobe lights to observe product quality. The brightness and effective irradiation width of this series of products can be customized according to customers, and the length of the instrument is also available200-1400 optional; According to the brightness requirements, it can also be divided into standard type, high brightness type, and strobe * type.