JX-8 Coal Slag Determination Instrument

NegotiableUpdate on 06/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

GB/T 1572-2001 Determination method for slagging of coal

Product Details

Make coal into a sample with a particle size of 3-6 mm, load it into the gasification chamber of the instrument, ignite it with charcoal of the same particle size, and under a certain blowing intensity, gasify or burn it. After the sample is burned out, stop blowing, cool it down, take out the charcoal residue and weigh it. Then, pass it through a vibrating screen with a 6mm sieve hole, calculate the percentage of charcoal residue weight greater than 6mm to the charcoal residue, which is the slagging rate, and evaluate the slagging property of coal.

JX-8 Coal Slag Determination Instrument is a specialized instrument for measuring the difficulty of coal slagging during gasification or combustion. It is developed according to the technical requirements specified in the national standard "Method for Determining Coal Slag Determination" (GB1572-89). Mainly used to determine the difficulty of coal slagging during gasification or combustion processes. Widely used in laboratories of coal, metallurgy, power and other departments, especially in units that use coal as fuel. If there are boiler units, slagging properties can be measured in advance to guide on-site coal selection and prevent slagging.

Coal sample particle size 3-6mm
Sample size 400 ° C
Should be equipped with a blower: air volume ≥ 12 m3/h, air pressure ≥ 1000mmHg

GB/T 1572—2001Method for determining the slagging property of coal

GB T 1572-2018Determination of clinkering property of coal

GB 1572-89Determination of clinkering property of coal