-
E-mail
huanuodianzi@126.com
-
Phone
13839220101
-
Address
Chengbei Industrial Zone, Hebi City, Henan Province
Product Categories
Huanuo Electronic Technology Co., Ltd
JC-9A fully automatic microcomputer glial layer analyzer
NegotiableUpdate on 06/07
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
GB/T479-2016 "Determination Method for Index of Colloidal Layer of Bituminous Coal"
Product Details
1. Fully automated. The computer draws the volume curve, the intelligent robotic arm measures the thickness of the glial layer, automatically draws the upper and lower layer curves and calculates the results, greatly reducing labor intensity and human factors.
2. Automatic smoke exhaust. No need to put it in a fume hood for testing, the automatic smoke exhaust effect is good, reducing laboratory configuration requirements and saving costs.
3. Automatic alignment. No need to manually adjust the alignment paper tube, automatic alignment is precise, improving the reliability and stability of testing, and making it more convenient to use.
4. Automatically pick up and hang weights. Automatically control the hanging and removal of weights, reducing labor intensity and operational steps.
5. No need to attach a volume sensor. To avoid experimental failure caused by forgetting to attach the volume sensor and improve the stability of the test.
6. Safe and reliable. The strong electrical parts such as silicon carbide rods and silicon carbide rod clamps are isolated and protected. The circuit controls the installation of weak and strong electrical components, and automatically monitors the entire testing process to improve the safety of laboratory maintenance personnel and instruments.
2. Automatic smoke exhaust. No need to put it in a fume hood for testing, the automatic smoke exhaust effect is good, reducing laboratory configuration requirements and saving costs.
3. Automatic alignment. No need to manually adjust the alignment paper tube, automatic alignment is precise, improving the reliability and stability of testing, and making it more convenient to use.
4. Automatically pick up and hang weights. Automatically control the hanging and removal of weights, reducing labor intensity and operational steps.
5. No need to attach a volume sensor. To avoid experimental failure caused by forgetting to attach the volume sensor and improve the stability of the test.
6. Safe and reliable. The strong electrical parts such as silicon carbide rods and silicon carbide rod clamps are isolated and protected. The circuit controls the installation of weak and strong electrical components, and automatically monitors the entire testing process to improve the safety of laboratory maintenance personnel and instruments.
This product is an automatic glial layer measuring instrument that completes the entire measurement process fully automatically, and automatically exhausts smoke without the need to place it in a fume hood for testing. The automatic probe aligns with the paper tube and automatically hangs a barcode removal and volume sensor. More reliable and convenient to use, it can be widely applied in departments such as coking, metallurgy, chemical engineering, teaching, and coal quality inspection.
1. Test method: In accordance with GB/T 479-2000 Determination method for the gelatinous layer index of bituminous coal
2. Temperature control range: room temperature~800 ℃
3. Temperature control accuracy: The error before 250 ℃ is ± 10 ℃; Error ± 5 ℃ between 250 ℃ and 730 ℃
4. Volume sensor accuracy: 0.05%
5. Pressure sensor accuracy: 0.02% FS
6. Detector displacement accuracy: 0.02%
7. Repeatability limit: Y value ≤ 20mm, error not greater than 1mm;
Y value>20mm, with an error not exceeding 2mm;
The error of X value shall not exceed 3mm
8. Dimensions: 860mm (length) x 640mm (width) x 950mm (height)
9. Working conditions: Environmental temperature: (5-40) ℃; Relative humidity: (20-85)% RH
10. Power supply: voltage 220V ± 22V, frequency 50HZ ± 1HZ, power not less than 5KW
11. There is no strong vibration, airflow, electromagnetic interference, or corrosive gas around the laboratory
2. Temperature control range: room temperature~800 ℃
3. Temperature control accuracy: The error before 250 ℃ is ± 10 ℃; Error ± 5 ℃ between 250 ℃ and 730 ℃
4. Volume sensor accuracy: 0.05%
5. Pressure sensor accuracy: 0.02% FS
6. Detector displacement accuracy: 0.02%
7. Repeatability limit: Y value ≤ 20mm, error not greater than 1mm;
Y value>20mm, with an error not exceeding 2mm;
The error of X value shall not exceed 3mm
8. Dimensions: 860mm (length) x 640mm (width) x 950mm (height)
9. Working conditions: Environmental temperature: (5-40) ℃; Relative humidity: (20-85)% RH
10. Power supply: voltage 220V ± 22V, frequency 50HZ ± 1HZ, power not less than 5KW
11. There is no strong vibration, airflow, electromagnetic interference, or corrosive gas around the laboratory
GB/T479-2016 "Determination Method for Index of Colloidal Layer of Bituminous Coal"
GB/T479-2000Method for determination of gelatinous layer index of bituminous coal
Similar Product Recommend
