- Phone
-
Address
Room 208, Building 5, No. 88 Rongbei Road, Songjiang District, Shanghai
Product Categories
Shanghai Zengjun Industrial Co., Ltd
Iwazaki IWATSU CS-5400 Semiconductor Characteristic Curve Grapher
NegotiableUpdate on 05/15
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Iwazaki IWATSU CS-5400 Semiconductor Characteristic Curve Grapher is used for diodes, with a maximum peak voltage of 5000V (high voltage mode), LEAKAGE mode (cursor resolution of 1pA), and ※ no HC mode USB port capable of executing image data saving and setting data saving, equipped with a LAN interface specifically for remote control
Product Details
Iwazaki IWATSU CS-5400 Semiconductor Characteristic Curve GrapherIntroduction:
Iwazaki IWATSU CS-5400 Semiconductor Characteristic Curve GrapherUsed for diodes, zuiHigh peak voltage 5000V (high voltage mode), LEAKAGE mode (cursor resolution 1pA), ※ no HC mode USB port capable of executing image data saving and setting data saving, equipped with a LAN interface specifically for remote control
Suitable for measuring the characteristics of various semiconductors such as IGBT, MOSFET, transistor, diode, etc
Maximum peak voltage 5000V (high voltage mode)
Maximum peak current of 1500A (CS-5400 high current mode)
All models are equipped with LEAKAGE mode (cursor resolution 1pA)
USB port for executing image data saving and setting data saving
Equipped with a LAN interface specifically designed for remote control
Semiconductor Curve GrapherCS-5400
The maximum peak voltage5,000V(High voltage mode)
The maximum peak current1,500A(HCPulse mode)
LEAKAGEpattern(Cursor resolution1pA)
Semiconductor Curve GrapherCS-5300
Maximum peak voltage (high voltage mode)
The maximum peak current1,000A（HCPulse mode)
LEAKAGEpattern(Cursor resolution1pA)
Semiconductor Curve GrapherCS-5200
Maximum peak voltage (high voltage mode)
The maximum peak current400A（HCPulse mode)
LEAKAGEpattern(Cursor resolution1pA)
Semiconductor Curve GrapherCS-5100
The maximum peak voltage5,000V(High voltage mode)
LEAKAGEpattern(Cursor resolution1pA)
※ NoneHCpattern
Collector power supply HV mode
model
CS-5100
CS-5200
CS-5300
CS-5400
Mode/polarity
HC mode not equipped
Pulse/ + -
The maximum peak voltage
40V
30V
The maximum peak current
400A
40A
1,000A
400A
40A
1,500A
600A
60A
The maximum peak power
4kW
400W
10kW
4kW
400W
12kW
4.5kW
400W
pulse width
The pulse width can be adjusted within the range of 50 µ s to 400 µ s (10 µ s resolution)
measurement point
Measurement points can be specified (10 µ s resolution)
Vertical axis range
100mA～50A/div
100mA～100A/div
100mA～200A/div
test bench
CS-303
CS-304
model
CS-5100
CS-5200
CS-5300
CS-5400
Mode/polarity
HC mode not equipped
Pulse/ + -
The maximum peak voltage
40V
30V
The maximum peak current
400A
40A
1,000A
400A
40A
1,500A
600A
60A
The maximum peak power
4kW
400W
10kW
4kW
400W
12kW
4.5kW
400W
pulse width
The pulse width can be adjusted within the range of 50 µ s to 400 µ s (10 µ s resolution)
measurement point
Measurement points can be specified (10 µ s resolution)
Vertical axis range
100mA～50A/div
100mA～100A/div
100mA～200A/div
test bench
CS-303
CS-304
| model | CS-5100 | CS-5200 | CS-5300 | CS-5400 | |||||
|---|---|---|---|---|---|---|---|---|---|
| Mode/polarity | HC mode not equipped | Pulse/ + - | |||||||
| The maximum peak voltage | 40V | 30V | |||||||
| The maximum peak current | 400A | 40A | 1,000A | 400A | 40A | 1,500A | 600A | 60A | |
| The maximum peak power | 4kW | 400W | 10kW | 4kW | 400W | 12kW | 4.5kW | 400W | |
| pulse width | The pulse width can be adjusted within the range of 50 µ s to 400 µ s (10 µ s resolution) | ||||||||
| measurement point | Measurement points can be specified (10 µ s resolution) | ||||||||
| Vertical axis range | 100mA～50A/div | 100mA～100A/div | 100mA～200A/div | ||||||
| test bench | CS-303 | CS-304 | |||||||
| Loop correction | hardware | Correction of floating capacitance between collector power supply and ground | |
| software | Simulate loop processing through software's fine line processing | ||
| Ladder signal generator | offset | Set range | STEP AMPLITUDE setting -10x to+10x |
| resolution | 1% of STEP AMPLITUDE setting | ||
| Current mode | Amplitude range | 1-Step 50nA~200mA, 21 Step 1-2-5 Switching | |
| Zui high current | 2A | ||
| The maximum voltage | 10V以上 | ||
| Voltage mode | Amplitude range | 1-Step 50nA~2V, 6-Step 1-2-5 Switching | |
| Zui high current | 500mA～(～8V)、200mA～(～15V)、10mA～(～40V) | ||
| The maximum voltage | ±40V | ||
| Step rate | Twice 50Hz or 60Hz (1x in AC mode), pulse interval in HC mode | ||
| Pulse/Step | pulse width | 50µs～400µs (10µs 步进) In HC mode, it has a large pulse width of 100 µ s before and after the collector power pulse |
|
| Step number | 0-20 steps | ||
| AUX output | range | OFF, -40V~+40V (adjustable in 100mV steps) | |
| Measurement Mode | REPEAT、STOP/SINGLE、SWEEP | ||
| Vertical axis (full scale 10div) | Collector current | range | HV mode: 1 µ A/div~2A/div, 20 step 1-2-5 switching (HC mode specified separately) |
| probability | 2% of the reading+0.05 × VERT/div Add the loop correction difference of the maximum peak voltage of each of the following: 0.5µA(30V)、1µA(300V)、6µA(3kV)、12µA(5kV) It is stipulated that the maximum peak voltage should be above 10% for 30V, 300V, and 3kV, and above 30% for 5kV |
||
| Emitter current (LEAKAGE) |
range | 1nA/div～2mA/div、 20 Steps 1-2-5 Switching (Collector power mode is LEAKAGE) |
|
| probability | Reading below 2%+0.05 × VERT/div+1nA | ||
| Horizontal axis (full scale 10div) | Collector voltage | range | HC mode: 50mV/div~5V/div, 7-step 1-2-5 switching (HV mode specified separately) |
| probability | Reading below 2%+0.05 × HORIZ/div | ||
| Base electrode/ Emitter voltage |
range | 50mV/div～5V/div、 7-Step 1-2-5 Switching | |
| probability | Reading below 2%+0.05 × HORIZ/div | ||
| display | monitor | 8.4-inch TFT LCD | |
| data count | 1000 points/curve (AC, full wave rectification) 20-1000 points/curve (SWEEP mode) |
||
| curve display | Interpoint interpolation display, point display | ||
| average | OFF、 2-255 times | ||
| Retention time | OFF、SHORT、LONG、 Infinite length | ||
| Internal waveform saving (REF) | 4 Screens | ||
| Cursor measurement | DOT | Vert, Horiz, β or gm | |
| fLINE | Vert, Horizon, 1/degree, intercept | ||
| FREE | Vert, Horiz, β or gm | ||
| WINDOW | Vert, Horiz, β or gm in the WINDOW area | ||
| Data saving/reading | Internal memory | Settings: 256, REF: 4 screens | |
| External memory | USB1.1: Settings, waveforms, image hard copies (BMP, TIFF, PNG) | ||
| remote | Equipped with remote connectivity via LAN (10BASE-T/100BASE-TX：1 端口) |
||
| power supply | AC100～240V 50/60Hz、 Maximum power during operation: 500VA (400W), standby: 50VA (7W) | ||
| Dimensions (mm) weight |
CS-5100 | Approximately 424W × 220H × 555D(excluding protrusions and attachments) About 28kg(Excluding attachments) |
|
| CS- 5200, 5300, 5400 | Approximately 424W × 354H × 555D(excluding protrusions and attachments) About 43kg(Excluding attachments) |
||
Similar Product Recommend
