Introduction to Container Mobile Maintenance Room

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Container mobile maintenance has been widely used in many national engineering projects such as construction, transportation, engineering, highways, railways, water conservancy, airports, etc Suitable for temperature and humidity control of standard maintenance rooms in highway construction, high-speed railway construction, housing construction projects, cement product factories, and construction highway units, colleges and universities, scientific research, and quality inspection units. It has the advantages of easy operation and accurate control

Product Details

　　Mobile maintenance room,Container Mobile Maintenance RoomIntroduction;

Mobile maintenance rooms have been widely used in many national engineering projects such as construction, transportation, engineering, highways, railways, water conservancy, airports, etc Suitable for temperature and humidity control of standard maintenance rooms in highway construction, high-speed railway construction, housing construction projects, cement product factories, and construction highway units, colleges and universities, scientific research, and quality inspection units. It has the advantages of easy operation and accurate control.

　　Container Mobile Maintenance RoomApplication areas: engineering construction, power construction, petroleum exploration, field operations, and other fields.

　　Mobile maintenance roomTechnical indicators:

1. Temperature control range: 0-50 ℃ Temperature control accuracy: 20 ± 2 ℃

2. Humidity control range: ≥ 95% (relative humidity) Heating power: 3KW

3. Refrigeration power: ≤ 2KW

4. Humidification power: 90W Power supply voltage regulation: 220 ± 10% V

5. Power frequency: 50 ± 1HZ

6. Dimensions: (controller) 500 × 285 × 900mm

7. (Host) 600 × 400 × 550 mm

　　Mobile maintenance room,Container Mobile Maintenance RoomInstallation method:

(1) Firstly, fix the controller outside the maintenance room, select a nearby position to place the temperature and humidity probe inside the maintenance room and fix it properly. Connect the temperature and humidity sensors to the controller according to their numbers.

(2) Then place the host in the center of the maintenance room, connect the inlet of the humidifier to the tap water pipe with a water pipe, and turn on the water (normally open for a small amount) to automatically control the inlet. The water level must be higher than the electric heating tube to prevent dehydration and burning of the electric heating tube. The heating and humidification plugs should be plugged into the sockets of the controller.

(3) Before installing the air conditioner, the remote control system needs to be removed, and then the power plug of the compressor should be directly connected to the refrigeration socket.

(4) The grounding wire must be properly connected during installation, and the power supply must be connected to the controller through a single use knife switch.

2. Usage:

(1) The working program of the instrument has been set according to the control of 20 ± 2 ℃ when it leaves the factory, and users do not need to set it again.

(2) Under no-load conditions, conduct a trial operation of the controller. When the output signal is correct, connect the power plugs of the external load (cooling, heating, humidification) to the sockets behind the controller, and connect the water source to start working.

Equipment List: One maintenance room controller, one ultrasonic humidifier, one 2P maintenance room air conditioner, five sets of test block racks, and one container