Decorative tile bonding strength tester ZQS6-2000A

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Application of the Decorative Brick Bonding Strength Tester: On site testing of the bonding strength of external wall decorative bricks, external wall insulation materials, paints, and coatings. Using software calibration, there is no need to disassemble the pressure gauge. Simply add the pressure to the value and complete it with just one click, greatly facilitating user calibration and use. It is an upgraded product;

Product Details

　　1、 Decorative brick bonding strength tensile tester,Decorative tile bonding strength testerpurpose：

The applicable standards for on-site testing of the bonding strength of exterior wall decorative tiles, exterior wall insulation materials, paints, and coatings are:

　　2、 Execution standard for bond strength pull-out tester of decorative tiles:

JGJ110-97 "Inspection Standard for Bonding Strength of Decorative Bricks in Building Engineering" JGJ126-2000 "Construction and Acceptance Specification for Exterior Wall Decorative Brick Engineering" JGJ144-2004 "Technical Specification for Exterior Wall External Insulation Engineering" JG158-2004 "Rubber Powder Polystyrene Particle Exterior Wall External Insulation System" JG149-2003 "Expanded Polystyrene Board Thin Plastering Exterior Wall External Insulation System"

　　3、 Decorative brick bonding strength tensile testerFeatures:

This is a high-precision bonding strength tester developed by our company according to market requirements. It can not only measure the bonding strength of exterior wall finishes, but also the bonding strength of exterior wall insulation materials, paints, and coatings. It uses our company's SW-4B intelligent digital peak retention meter, which can measure a force value of 0.001kN at the smallest possible value, meeting the testing needs of various bonding strengths. This intelligent digital meter has peak holding, storage, and query functions,

Its biggest feature is:

(1) High precision: The smallest force value can be measured at 0.01kN;

(2) High efficiency: Compared with traditional pressurization methods, the pressurization speed of this detector can be increased by nearly 10 times, * reducing detection fatigue caused by improper pressurization structure;

(3) Using software calibration, there is no need to disassemble the pressure gauge. Simply add the pressure to the value and complete it with just one click, greatly facilitating user calibration and use. It is an upgraded product;

(4) Using efficient nickel hydrogen rechargeable batteries, it can be reused for a long time. The instrument host is designed according to the industry standard "Code for Construction and Acceptance of Exterior Wall Decorative Brick Engineering", and can be continuously and uniformly loaded. The manual pump is connected to the jack as a whole, with a compact structure and durability. It uses a liquid crystal display to display the bonding force value, automatically and accurately record the bonding force value and provide peak retention. The product uses high-efficiency nickel hydrogen rechargeable batteries, which are compact and lightweight, with a total weight of about 3 kilograms, making it easy to carry and use on site. It meets the requirements of the "Inspection Standard for Bonding Strength of Decorative Bricks in Building Engineering JGJ110-97". The specifications of the standard blocks used are 95mm × 45mm × 8mm and 40mm × 40mm × 8mm, and the specifications of the insulation material standard test block are 100mm × 100mm × 8mm. When meeting the qualification requirements, the minimum tensile force is 0.64kN. The maximum tensile force is 2.56kN. In response to the low bonding strength and weak bonding force of decorative tiles, the maximum tensile force is designed to be 6.00kN, To ensure the detection accuracy of the instrument The ZQS6-2000A high-precision bonding strength tester is an ideal replacement for the original bulky, structurally complex, and inconvenient to operate testers. This tester has been widely used in many construction units, engineering quality inspection stations (centers), laboratories, research institutes, and supervision units across the country, and is highly welcomed by engineering and technical personnel.

　　4、 Decorative brick bonding strength tensile testerBasic configuration:

1. One host; (including high-precision sensing and detection unit)

2. One intelligent digital peak retention meter;

3. One sensor connecting wire;

4. Two groups of three standard blocks each (95mm × 45mm/40mm × 40mm)

5. One manual;

6. One set of industry standards and specifications;

7. One aluminum alloy packaging box;

8. One certificate of conformity and one warranty card each