Intelligent digital display regulator XTMD-100

NegotiableUpdate on 05/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The intelligent digital display regulator XTMD-100 adopts SMT surface mount technology with a specification parameter of $r $n $r $n, and an accuracy of 5% FS #177; 1ding. Has a performance ratio of *.

Product Details

Intelligent digital display regulator XTMD-100

Specifications

The SMT surface mount technology used has an accuracy of 5% FS ± 1ding and a performance ratio of *.

Product Technical Data

input format

Intelligent digital display regulator XTMD-100

thermocouple

B:0～1800℃ S:0～1600℃

K:0～1300℃ E:0～800℃

T:0～300℃ J:0～800℃

Wu-Re3-25 0～2000℃

thermal resistor

Pt100：-100～200℃

-200～600℃

Cu50：0～150℃

Linear input

mV输入： 0～100mV. DC; 0～50mV. DC; 0～100mV. DC;

Voltage input: 0-5V. DC; 1～5V.DC;

Current input: 0-10mA.DC; 4～20mA.DC;

Resistance remote transmission pressure signal: 0-400 Ω

Radiation temperature sensor:

WFT-202(F1Quartz glass) 400-1200 ℃

WFT-202(F2,K9Glass) 700-2000 ℃

XTMD-100 Intelligent Digital Display Regulator Product Selection Information

X	specification									content
	Z									Single display
	T									With adjustment
	Instrument form	M
			A							160 × 80 (mm) vertical type A (H)
			D							96×96(mm)
			E							72×72(mm)
			F							48 × 96 (mm) vertical is F (H)
			Overall dimensions	-
					1
						0				Upper and upper limit alarms
						1				Upper and lower limit alarms
						2				Lower and upper limit alarms
						3				Lower and lower limit alarms
						Adjustment mode/alarm mode	0			Full input
							1			thermocouple
							2			thermal resistor
							4			Remote pressure gauge
							5			Linear input
							6			Radiation thermometer
								-
									Additional features	Equipped with 24V transmitter power supply

X	□	M	□	-	1	□	□	-	D

Note: Users should specify the specific model when placing an order, and set it according to that model when leaving the factory. If the specific model and specifications are not specified, set it according to the factory values in the manual.