Integrated vibration transmitter for wind turbine

Integrated vibration transmitter for wind turbine

Integrated vibration transmitter for wind turbine

1、 Overview:

Integrated vibration transmitter is a fixed installation online vibration measurement device, mainly used for measuring vibration velocity values. Its output form is 4mA to 20mA standard current, which is proportional to the magnitude of the vibration value. It can be directly input into PLC/DCS to form a system that can monitor and protect equipment such as centrifugal pumps, reciprocating compressors, centrifuges, cooling towers, industrial fans, electric motors, and gas turbines. This device adopts an integrated design of sensors and instrument body. The integrated vibration transmitter is suitable for monitoring and protecting equipment such as centrifugal pumps, reciprocating compressors, centrifuges, cooling towers, industrial fans, electric motors, and gas turbines.
2、 Technical parameters
range
Vibration amplitude: * 0-200um; 0-500um; 0～1000um
Vibration intensity: 0-10.0mm/s; *0～20.0mm/s； 0～50.0mm/s
1Frequency response: 5-500 Hz
2Natural frequency: 10Hz
3 Output current: 4-20mA
4 Output impedance: ≤ 500 Ω
5 Working voltage: DC24V
6 Connection method: 2-wire system (DC24V power supply shares 2 wires with 4-20mA) or 3-wire system (ground, power supply, output)
7 Maximum acceleration: 10g
8 Measurement direction: vertical or horizontal
9 Operating environment: Temperature -40 ℃~85 ℃, relative humidity ≤ 90%
10Dimensions: φ 45 × 80 (mm)
11 Weight: Approximately 450g
12 Installation thread: M16 × 1.5

3、 Installation
1 Installation position: Installed vertically or horizontally on the vibration point being measured, fixed with M16 × 1.5 × 20 threads at the bottom of the transmitter.

The casing vibration transmitter is widely used for vibration measurement of rotating machinery and other equipment such as fans, water pumps, compressors, steam turbines, etc. in industries such as power, steel, and petrochemicals. The various vibration levels during equipment operation are important indicators for estimating whether the equipment is running normally. Using the PC-Z series casing vibration transmitter to measure vibration is an economical and high-quality solution.

The series of shell vibration transmitters is complete, and according to the selection, the shell vibration speed and displacement can be measured. Users can refer to the selection guide to choose the product that is suitable for themselves.