Integrated equipment for finished buried fire water tank and pump room

Integrated equipment for finished buried fire water tank and pump room

The applicability of buried integrated sewage lifting pump stations is highly in line with development. In the continuous technological competition, equipment advantages are also an effective way to improve the practical application of products. With strong utilization capabilities, it expands its continuously developing applicability, which is a qualitative leap for the overall improvement of products.

The pump unit installed underground in the BDF fire integrated pump station should be equipped with industrial dehumidification equipment in the pump room, and the dehumidification equipment model should meet the indoor dehumidification effect. At the same time, the condensed water on the wall inside the pump room can flow into the integrated fire water tank and sewage treatment pump room through the diversion groove set at the bottom of the wall. Emergency drainage facilities should be installed in the sewage treatment pump room, and two sewage pumps should be used for emergency drainage discharge. When the emergency water level is reached, both pumps can work simultaneously.

The intelligent buried integrated sewage lifting pump station adopts the on-demand prefabrication method, and is prefabricated according to the customer's requirements, as well as the engineer's on-site investigation and measurement results, to customize the overall pump station that meets the customer's needs. After the installation and commissioning of internal equipment such as water pumps, valve pipelines, sensor devices, and intelligent control systems, they are transported to the project site for direct hoisting, effectively solving various problems that arise during the construction and operation of pump stations.

Maintenance of pumping stations in practical applications:
(1)If disassembly is convenient, the water pump and pipeline can be removed and cleaned thoroughly.When the integrated prefabricated pump station is not in use, the remaining water in the pump and pipeline should be drained.
(2)When the integrated prefabricated pump station is not in use, the remaining water in the pump and pipeline should be drained.
(3)Check whether there are cracks or small holes on the impeller, and whether the impeller fixing nut is loose. If it is damaged, it should be repaired or replaced. Check the leaves
(4)Check the ball bearings, and replace them if the inner and outer sleeves are worn, loose, the ball bearings are worn, or there are spots on the surface. Still usable gasoline
Clean the bearings with oil or kerosene and store them with butter.
If the clearance at the wheel wear reduction ring exceeds the specified value, it should be repaired or replaced.
(5) If the water pump and pipeline are not disassembled, the outlet should be sealed with a cover plate to prevent debris from entering.

Advantages of integrated sewage lifting pump station 1:High degree of automation integration, capable of on-site or remote monitoring and management, and capable of mobile communication monitoring;Small in size, but with a large effective volume;
Advantage 2 of integrated sewage lifting pump station:Small in size, but with a large effective volume;
Advantage three of integrated sewage lifting pump station: safe use, its reasonable design greatly reduces the generation of highly toxic and odorous gases, and protects the environment; The enclosed pump station can be equipped with an integrated deodorization device to solve the problem of a small amount of odor overflowing and disturbing residents.
Advantage four of integrated sewage lifting pump station:Secondary investment, low long-term operating costs, significant energy-saving benefits, and can be lifted up for secondary landfill and reuse in case of demolition or occupation.
Advantage five of integrated sewage lifting pump station:Short installation cycle, no infrastructure, saving most costs, and saving time and effort in maintenance.

The integrated fire pump station of the buried box pump is a buried integrated fire water tank, and the material of the fire pump station water tank is BDF composite sheet for the bottom and side plates, and the cover plate is galvanized steel sheet. The overall installation factory has an effective production capacity of 504 cubic meters. The interior of the pool is reinforced with L8 bags of zinc steel pipes as support and tension bars. Two sets of dry installation fire pumps and two sets of sprinkler pumps are used for the pumping station, and the No. 16 I-beam is reinforced on the inner side of the frame. After the installation of fire water escape, it is necessary to apply asphalt paint on the outer layer to protect the water tank from corrosion.

Integrated equipment for finished buried fire water tank and pump room