Injection water preparation system

Injection water preparation systemProduct Features
1. The distilled water machine can withstand a pressure of 8 bar or higher, and the pressure vessel design complies with GB150 or other acceptable pressure vessel regulations and standards
2. The evaporator, all preheaters, and condensers should adopt a double tube plate structure, which can prevent cross contamination
3. The distilled water machine should have online disinfection function
4. The first and last effects of the distilled water machine have automatic discharge function for ultra-high liquid level
5. Each effect has a lower ranking
6. The final concentrated water should have anti backflow function for sewage
7. The frame should have a device for adjusting the level
8. All steam pipelines should be insulated to reduce heat radiation
9. The cooling water should have continuous adjustment function (to ensure constant temperature of injection water)
10. The conductivity meter for injection water should have temperature compensation function
11. A four pen paper recorder can be used to record the conductivity of the inlet and outlet water, the outlet water temperature, and the return water temperature
12. The control cabinet adopts air supply protection to achieve dust-proof, heat-resistant, and moisture-proof effects. The instrument cabinet is separated from the high-voltage cabinet

Injection water preparation systemworking principle

Allow fully preheated water to undergo multi effect evaporation and condensation to remove non condensable gases and impurities, thereby obtaining high-purity distilled water. To ensure the quality of distilled water, the raw material water must be pre treated, usually using deionized water as the raw material water
The commonly used ones nowadays are generally four effect or five effect The water output can already meet the requirements.