Injection molding machine particle feeding high-pressure fan

Injection molding machine particle feeding high-pressure fanThe motor housing is made of precision cast aluminum alloy and is manufactured using fully automatic processing equipment and international standard process flow. The high-pressure air pump has sound-absorbing cotton in both the suction and discharge pipes, which has the advantages of small volume, large air volume, low noise, and maintenance free The product runs quietly and smoothly, with low noise and energy saving, sturdy and durable, easy to maintain, complete specifications, and a globally unified voltage design; 50Hz-60Hz shared.

High pressure feeding fanThe plastic raw materials are transported from the storage tank to the central drying system through a centralized pipeline system, and then the dried raw materials are transported to each injection molding machine. The central conveying system adopts a design of "one machine, one pipe" to ensure stable operation of the entire system and no occurrence of material blockage. It is used in conjunction with a central drying system and can transport raw materials using dry air to prevent moisture regain after drying. At the same time, after each conveying cycle, the conveying pipeline will be cleaned to ensure that there are no residual particles in the pipeline. This not only avoids the moisture regain of the raw materials, but also ensures the consistency of the performance of the raw materials added to the injection molding machine. Under the vacuum negative pressure of the high-pressure fan, the original dust in the raw materials will be filtered out through the dust filtration system, which helps to improve the quality of the formed products.

Injection molding machine particle feeding high-pressure fanFeatures:

1. With high efficiency and low energy consumption, any method such as blowing or suction has its effectiveness, and it has a relatively conservative design in the high-pressure range. When the usage situation changes, the high-pressure fan can still operate safely

2. Easy to install. The high-pressure fan can be installed at any time in the place of use to supply compressed air or for vacuuming. And the high-pressure fan can be installed in any horizontal or vertical direction.

3. High reliability: In addition to the impeller, the high-pressure fan has no other moving parts, and the impeller is directly connected to the motor without gears or transmission belts, so the high-pressure fan has high reliability and is almost maintenance free.

4. The low vibration high-pressure fan has high mechanical precision, and the rotating parts have undergone extremely precise balance design, testing, and calibration, so the vibration rate of the high-pressure fan is very low.

The high-pressure blower blows the plastic particles in the hopper to make them flow quickly, preventing accumulation and blockage, thus ensuring the continuity and stability of production.

Maintain temperature balance: During the production process of injection molding machines, the temperature inside the hopper has a significant impact on product quality. The high-pressure fan blows the air inside the hopper to maintain temperature balance and ensure the stability of product quality.

Improve production efficiency: High pressure fans can help plastic particles flow quickly, prevent blockage and accumulation, thereby reducing downtime in production and improving production efficiency

.

Vacuum conveying: The high-pressure fan utilizes its high vacuum degree in the central feeding system for vacuum conveying, and transports raw materials from the storage tank to the injection molding machine through a centralized pipeline system. This design method ensures the stability of the system operation, avoids material blockage, and can dry the raw materials to prevent moisture regain and improve the quality of the formed products.

Precautions for use:

Before the first use of the fan, it is necessary to carefully check whether the voltage and frequency indicated on the product nameplate meet local requirements, and strictly operate according to the rated voltage of the motor

Before running the fan, it is necessary to check whether there is any collision or friction between the fan blades and the casing, whether the motor is grounded, and whether the insulation is good

3. Before running the fan, it is necessary to check whether the rotation direction of the impeller is correct before operation. If there is any abnormal noise during the trial run, it can be started

If there is any vibration phenomenon, the machine should be stopped immediately, the power should be cut off for troubleshooting, and it can only be used after it is normal

When the air intake of the fan is vertically downward or upward, the pressure bearing of the motor should be replaced before use

5. The temperature of mesons transported by the fan should not exceed 80 degrees Celsius

6. Fans should not be used in areas where water is easily sprayed or directly exposed to rain

7. Fans should not be used in environments where chemical gases are corrosive, flammable, or explosive

8. The foundation or support for fastening the fan must be firm

9. The connection of the fan pipeline network should be stable, and the weight of the pipeline should not be added to the various components of the fan

When a regulating valve is installed in the pipeline, the inlet regulating valve of the fan should be turned off before shutting down, and the outlet regulating valve should be slightly opened. After the fan is running normally, gradually open the regulating valve

Shanghai Xinke Industrial Co., Ltd. After sales and service

1. The company agrees that in the event of damage due to defects in parts or manufacturing defects during normal use It can be repaired immediately or replaced with a new product free of charge within one year after sale.

If it is due to improper use by the customer Repair of damage caused by unauthorized installation of accessories or self modification of the machine body Reasonably charge maintenance fees.

3. Damage caused by natural disasters or harsh operating environments Although it is difficult to accept within the warranty period.

If it is not possible to obtain proof of shipment date, the manufacturing date on the motor nameplate shall prevail.

5. Our company is responsible for the products Not exceeding the original selling price of the product.