Gas delivery vortex air pump

Gas delivery vortex air pumpIt is a new type of gas source generation equipment that uses high-strength, fatigue resistant high-quality aluminum alloy materials as the main material. It has the characteristics of compact structure, small volume, and light weight. The vortex pump adopts a dedicated motor direct connection type, which does not require any variable speed mechanism. Due to its simple structure and direct transmission form, it also has the advantages of low noise, low energy consumption, stable performance, and easy maintenance. Moreover, the gas source sent out is free of water, oil, and low temperature rise, which is incomparable to other gas source generation equipment.

Whether it is widely used in domestic mechanical equipment production lines or the demand for manufacturing and exporting mechanical equipment, our high-pressure fans can meet the requirements; The aluminum alloy casting of high-pressure fan products has an exquisite appearance. As a required accessory for gas source equipment, it is easy to install, lightweight, and has no oil, water, or pollution when blowing and sucking gas; It is an industrial component selected for the operation and production equipment of mechanical gas sources.

Gas delivery vortex air pumpPerformance characteristics:

1. Pressure stability: Excellent operational balance performance, high mechanical precision, and the operating parts have undergone extremely precise balance design, testing, and calibration, resulting in extremely low vibration rate. We have demonstrated through water treatment and electroplating examples that the stirring is uniform and the water wave rolling height is consistent.

2. Ultra low noise: Low noise direct transmission, with built-in sound filters at both the outlet and inlet, which can greatly reduce the noise during operation; According to customer requirements, it can be upgraded to silent operation to meet their needs.

3. Energy saving and environmental protection: The high-pressure fan adopts ADC12 material, which is the same as the wheel drum of Mercedes Benz cars. It transcends the old casting process of pig iron, and the impeller does not come into contact with other components, without oil or pollution. It has the characteristics of "high, precision, and light", with high technological content, energy saving, low-carbon, and high-quality * excellent products.

4. Widely used: High voltage blowers also use 50/60Hz broadband motors, and different voltage specifications can be selected according to different customer needs; High pressure blowers are divided into high air volume and high pressure series, providing customers with more flexibility in their selection.

5. Easy maintenance: Apart from the impeller, the high-pressure blower has no other moving parts, and the impeller is directly connected to the motor without gears or transmission belts, resulting in higher reliability and almost maintenance free operation, saving a lot of operating and maintenance costs

Gas delivery vortex pumpOperation and maintenance:

After installation, the blower should be manually rotated before starting to check for any abnormal collisions or friction, whether the rotation direction of the motor is correct, and whether the inlet and outlet valves are in a low flow state.

2. During the operation of the fan, attention should be paid to whether there are any abnormal sounds, oil leaks, abnormal vibrations, high bearing temperature, excessive motor current, loose feet, or other abnormal phenomena inside the fan and motor, and they should be eliminated in a timely manner.

3. After 5000 hours of use, the bearing grease of the fresh air fan should be replaced.

4. Maintenance: When inspecting the casing, first loosen the screws on the horizontal split surface, open the upper half of the casing and the upper covers of the bearing boxes on both sides, and remove the rotor to repair the rotor or casing. During maintenance, special attention should be paid to whether the impeller blades are broken, whether there are cracks, and whether the main shaft is bent. Before installing and dismantling the machine casing, it is necessary to be careful to avoid damaging the rotor due to the swinging of the upper half of the casing during the installation and dismantling process.

5. During the shutdown period of the fan, the inlet and outlet of the fan should be covered properly to prevent debris from falling into the fan cavity and causing accidents.

6. The fan needs to be inspected every six months to remove dust and oil stains from the fan flow channel.

Shanghai Xinke Industrial Co., Ltd. After sales and service

1. The company agrees that in the event of damage due to defects in parts or manufacturing defects during normal use It can be repaired immediately or replaced with a new product free of charge within one year after sale.

If it is due to improper use by the customer Repair of damage caused by unauthorized installation of accessories or self modification of the machine body Reasonably charge maintenance fees.

3. Damage caused by natural disasters or harsh operating environments Although it is difficult to accept within the warranty period.

If it is not possible to obtain proof of shipment date, the manufacturing date on the motor nameplate shall prevail.

5. Our company is responsible for the products Not exceeding the original selling price of the product.