Ice water impact immersion comprehensive test chamber

1Ice water impactImmersion Comprehensivetest chamberProduct Features

1Support non-standard customization;

2The inner liner is2205 high-quality anti-corrosion stainless steel plate with excellent salt corrosion resistance. The base and other components are made of anti-corrosion stainless steel, ensuring a long service life;

3Nozzle cooling constant temperature（0~+4 ℃ and display records to prevent ice water from being heated by pipelines and nozzles during spraying and exceeding+4 ℃;

4Adopting anti-corrosion and wear-resistant pumps, suitable for various media and meeting more standards;

IIIce water impactImmersion Comprehensivetest chamberProduct Description

Ice water impactImmersion Comprehensivetest chamberMainly simulating the thermal shock caused by ice water in the splashing area of vehicles. Simulating a system where ice water splashes onto heat while driving on a waterway during winter/On the component.

IIIIce water impactImmersion Comprehensivetest chambermeet the standard

1GB/T 28046.4-2011（ISO 16750-4：2006）： Environmental conditions and tests for electrical and electronic equipment of road vehicles - Part 4: Climate loads;

2VW 80000:2009-10 LV124 Test items, test conditions, and test requirements for electrical and electronic components of vehicles under 3.5 tons;

3VW 80101-2005 General Test Conditions for Electrical and Electronic Components in Automobiles

4Ice water impactImmersion Comprehensivetest chamberTechnical Specifications

1type number: BSCJ-010Z

2Studio size: 100×105×108（D×W×H）cm

3Overall dimensions: about180×165×230（D×W×H）cm

4High temperature chamber temperature range: RT+10℃～150℃

5Temperature uniformity: ≤ 2 ℃ (when unloaded)

6Temperature fluctuation: ± 0.5 ℃ (when unloaded)

7Temperature deviation: ≤±2℃

8Heating rate: RT+10℃～150℃≤40min

9Water temperature range: （0~+4 ℃ (The freezing point of the medium must be at least 2 ℃ lower than the set temperature)

10Test liquid medium: deionized water or+5% NaCl or+3% Arizona fine dust (if dust is required, please specify, wear-resistant pump is used for dust, and the seal is a vulnerable part)

11Water tank capacity: approximately400L

12Water splash test

A.Water flow rate:（3～4）L/3S

B.Weekly Spray Time:3S

C.Number of cycles:100

D.Horizontal distance between nozzle and product:325±25mm

E.Nozzle: slotted nozzle, constant temperature（0～+4）℃

13Immersion test

A.Basket size: approximately50×50×30（D×W×H）cm

B.Hanging basket load-bearing capacity: 20Kg

C.Hanging basket lifting time:≤5S

D.Immersion time per session:1 to 99 minutes can be set

E.Number of cycles:1 to 99 can be set

5Ice water impactImmersion Comprehensivetest chamberIntroduction to Structural Design

1The equipment casing is processed and formed using high-quality galvanized steel plate CNC machine tools, and the surface of the casing is treated with spray coating for a smoother and more aesthetically pleasing appearance; The inner liner is2205 high-quality anti-corrosion stainless steel plate;

2Spray nozzle device: The spray nozzle is fixed in a square box with insulation layer and cooling device, and the insulation door is quickly opened when spraying;

3Insulation materialHigh density glass fiber cotton ensures insulation performance and maintains a balanced and stable indoor temperature;

4The box door is equipped with a transparent window for observing the changes of indoor samples, and the observation window is made of multi-layer insulated tempered glass;

5The air mixing system adopts a long axis fan motor, which is resistant to high and low temperatures316 stainless steel multi blade impeller is used to achieve strong convection and vertical diffusion circulation, ensuring uniform and stable temperature and humidity in the laboratory;

6Flow meter: An electronic flow meter is used to measure the flow rate of the test water flow, which can achieve control, regulation, display, and accumulation of the flow rate. Output through converter4-20mADC signal, connected to the central controller, controlled and displayed by it;

7The water pump adopts a wear-resistant and salt corrosion-resistant chemical pump;

8Double layer high tensile sealing strips with high temperature resistance are used between the door and the box of the equipment to ensure the sealing of the testing area. The inner panel of the gate is made of stainless steel and features non reactive door handles, making it easier to operate;

9test hole(On the left side of the machine) can be used for external testing of power or signal lines (with a diameter of 100mm);

10The refrigeration system of the equipment is installed at the bottom, and the compressor adopts Bitzer to ensure the refrigeration effect and reliability;

11High quality fixable installation at the bottom of the machinePU activity wheels can easily move the machine to the set position and finally fix the casters;

12The control part of the equipment is designed on the right side of the device, with temperature controllers, control switches, etc. distributed, making it easy to operate, simple, and maintain.

VIIce water impactImmersion Comprehensivetest chamberCircuit control and protection system

1Adopt Taiwan, China VILON7-inch LCD touch screen, Siemens PLC controls temperature, water pump and flow rate, and test time, etc; The traffic is displayed directly on the touch screen and supports USB storage and network communication.

2Schneider executes electronic components;

3Non fuse protection switch;

4Overload, leakage, fully sheathed terminal blocks;

5Equipped with protection such as automatic shutdown;

7Ice water impactImmersion Comprehensivetest chambermanufacture cold be unify

1Compressor: Bizelle;

2Refrigeration method: mechanical refrigeration;

3Condensation method: air-cooled;

4cryogen:R404A (environmentally friendly);

5All system pipelines are ventilated and pressurized48H leak detection test;

6The heating and cooling systems are independent;

7Internal spiral refrigerant copper tube;

8Slope evaporator;

9The dry filter, refrigerant flow window, repair valve, oil separator, solenoid valve, and storage tank are all imported original parts;

8Ice water impactImmersion Comprehensivetest chamberfollow machine capital material

1Instruction manual, circuit diagram, certificate of conformity, warranty card;

2Operation methods, precautions, basic shipping accessories, and maintenance matters;

9Ice water impactImmersion Comprehensivetest chamberEquipment usage conditions

1Ambient temperature5℃～＋28℃； Environmental humidity: ≤ 85%; Good ventilation;

2Power requirements:AC380 (± 10%) V/50HZ three-phase five wire system; Pre installed capacity: approximately 22KW;

3Gas source requirement: pressure greater than0.5MPa, The rated displacement is greater than 0.1m3/minute, and the equipment has a quick connector with a diameter of 8mm

4Municipal tap water and drainage floor drain (for wear-resistant pump cooling)

5Distilled water or deionized water and testing requirements include sodium chloride, etc;