Ice accumulation and freezing rain test chamber

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The icing and freezing rain test chamber is mainly used to evaluate equipment that may be exposed to icing conditions caused by ice rain or drizzle; Equipment whose performance is affected by the accumulation of ice caused by splashing or misting of seawater.

Product Details

积冰冻雨试验箱

Ice accumulation and freezing rain test chamberThe main focus is on establishing more stringent environmental conditions for the operation of power equipment (including high temperature, low temperature, high humidity, icing, lighting, alternating cold and hot conditions, etc.), conducting performance assessment tests on operating equipment or equipment performance sensitive components and all detection devices under harsh environmental conditions, and researching improvement measures for performance adaptation to harsh environments, in order to significantly enhance the equipment's ability to adapt to harsh environments and improve operation.

Mainly used to evaluate equipment that may be exposed to icing conditions caused by ice rain or drizzle; Equipment whose performance is affected by the accumulation of ice caused by splashing or misting of seawater.

Meet the standards:

GJB 150.22-2009 Ice and Freezing Rain Test

RTCA-DO-160G Airborne Equipment Environmental Conditions and Test Procedures Section 24 Ice Test Class C

Ice accumulation and freezing rain test chamberTechnical Specifications:

model		SE-FB010	SE-FB033
Studio size (WxDxHcm)		100x100x100	150x150x150
Outer box size (WxDxHcm)		130x250x215	205x280x220
sex can	temperature range	-40～+80℃
	Cold water temperature range	0 ℃ to room temperature
	temperature deviation	± 2 ℃ (unloaded)
	Temperature Uniformity	≤ 2 ℃ (unloaded)
	temperature fluctuation	≤± 0.5 ℃, expressed according to GB/T5170-1996 (unloaded)
humidity range		10%～98%RH
Humidity deviation		±3%(＞75%RH), ±5%(≤75%RH)
Ice accumulation, freezing rain, droplet size		Ice accumulation and freezing rain droplet size: 1-1.5mm;
Rainfall rate		25mm/h
ice thickness		Ice thickness: up to 6mm, 13mm, 37mm, 75mm
Ice accumulation, freezing rain, spray coverage area		Ice accumulation and freezing rain spray coverage area: diameter 0.5m
Raindrop diameter		1.0mm～1.5mm
Temperature Controller		Integrated color LCD touch screen main brain controller+expandable I/O module
refrigeration compressor		Imported fully enclosed compressor
outer box material		Electrostatic spraying treatment of cold-rolled steel plate for outer box
Inner box material		Inner box stainless steel plate (SUS # 304)
test hole		On the left side of the test chamber, there is one Φ 100 mm test lead hole, accompanied by a screw hole cover and a soft silicone plug
protective measures		Compressor overpressure, compressor overload, condenser fan overheating, over temperature, under phase/reverse phase, fan motor overheating, leakage, short circuit, automatic shutdown after fault alarm, etc
power supply		AC380V 50Hz three-phase four wire+grounding wire